Mazdaspeed EGR Block off and Delete

$ 25.00

Select your EGR kit

Product Details

The Damond Motorsports EGR Block off and delete Kits are designed to block off or remove the exhaust gas re-circulation system of the 2.3L DISI, in the Mazdaspeed3, Mazdaspeed6, and CX-7.

The Damond Motorsports EGR block off plate was designed to the same dimensions of the EGR tube’s flange. This allows for the tube to be installed, along with the block off plate, and the OEM gasket, for a clean stock look. We also include a screw-in bung for the intake manifold connection of the EGR system, to eliminate the tube all together.

The Damond Motorsports EGR Delete kit includes a plate that deletes the EGR valve all together, going in place of the valve, and creating more space for intake and turbo systems. The plate is machined out of aluminium, included is a barbed fitting for the turbo coolant line, along with a plug if you're running a coolant-less turbo, and the necessary mounting hardware.  
 
Our EGR Block off  and delete kits will prevent the travel of exhaust gases back into the intake system. In turn, this allows much cleaner air to enter the combustion chamber, for a cleaner more effective burn. Eliminating the EGR also eliminates harmful soot and carbon build up, in the intake system. This is a great product to add with one of our OCC Kits, to keep the intake system clean of gunk.
  
  • Tube Block off kits come with a plate and bung, to remove or block off the EGR tube
  • Valve Delete kits come with a plate, barb fitting, and hardware, to delete the EGR valve
  • Full Removal kits contain both the Block off and Delete kits, to fully remove the EGR system

Note: This product is intended for off-road use only

Customer Reviews

Based on 138 reviews
99%
(136)
1%
(1)
0%
(0)
0%
(0)
1%
(1)
S
Sophanna Eang
Great quality EGR delete kit

Quick and speedy service

E
Evan Dutch
Works as it should, with a little help.

With a little help, this EGR delete kit works as it should. When removing the EGR tube, the small blockoff plate they send with it requires the use of shorter bolts, you cannot use the bolts that came out of the EGR tube because they will bottom out before tightening down the plate. I was able to remedy this by cutting the EGR tube away from its flange that bolted to the head. This allowed me to install the EGR tube gasket, blockoff plate, then original flange without the tube and I was able to reuse the original fasteners. Don't worry about it being seen, as you won’t be able to see it once you reinstall your Turbo inlet pipe.

The instructions also say that you can reuse the original coolant hose from the turbo to the EGR if you flip it around. I was not able to get this to work, no matter which way I tried it, the hose always appeared to kink or to be too short. However, I did find another solution. I was able to buy a pre-bent piece of coolant hose from my local autoparts store. I used a Gates Heater Hose, Part number: 18020. It will require a little trimming to fit as it comes longer than you need it. But once installed, it is a much cleaner solution than reusing the old hose.

L
Logan
Amazing product

This is an amazing product well made. You can do the entire install without removing anything if you like to make your life difficult. I have orders 3 pervious things with Damond and never one issue. Fast quality shipping amazing product.

j
jesus martinez
Amazing quality

Fast shipping, amazing customer service.

D
Dylan Mitchell
Best egr delete

Great quality parts. Comes with everything needed to install. Shipping was very fast. And customer service was great