Honda Civic 10th Gen

With Honda's recall on fuel pumps, we know there are a lot of owners who don't want dealerships working on their cars or for those needing more fu...

This plate covers the holes in the back of the cylinder head for the exhaust camshaft and rocker arm shaft. The factory plate is made from a thin p...

We are excited to bring a low-cost performance brake modification to your HONDA CIVIC 20-16! The Damond Motorsports Caliper Bushings have many amaz...

Introducing the Wunderladen Racing rear motor mount for the 10th gen Honda Civic! One of the advantages of our mount is that it uses more bushing m...

Shortly after we got our 10th gen Civic we realized there was a distinct lack of brake kit options. We set out to put together a brake kit that use...

The Wunderladen Racing oil catch can kit is a great solution for keeping the inside of your Type R's intake manifold clean of octane reducing oil v...

This throttle body spacer allows for a convenient location for a methanol or water injection nozzle to be installed behind the throttle body. It fe...

This mount allows for an easily accessible towing point on the front driver side of the car. It mounts to a structural area of the car and is entir...

When looking for more front camber in the 10th gen Civic the only way to get it is by making adjustments at the top of the strut. The two most comm...

The Wunderladen Racing oil catch can kit is a great solution for keeping the inside of your 10th gen Civic's intake manifold clean of octane reduci...

These caliper bushings replace the soft factory rubber slide pin bushings that are on the rear of all 10th generation Honda Civics. The factory rub...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: Honda Civic Civic - FN Only (2005-2011)

 These bushings are for the Type R only.PFF25-1101 Front Wishbone Front Bushings use our classic 'top-hat' design in our Black 95A material and rot...

Fits manual PG1 type gearbox models only. This part fits gear linkages with a 40mm bore. For linkages with a 49mm bore please use PFF25-108.OEM Par...

This part fits the following models: Acura RSX Honda CR-V (2002-2006) Civic Civic Mk7 EP/EU including Si & Type R (2001-2005) Civic Mk7 EP/EU i...

PFF25-1120 Lower Torque Mount Insertis made using our Purple 80A material and uses our effective prong design to fill the voiding of the OE bush, l...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

31mm in diameter.OEM Part Number: 52365-SH3-000OEM Part Number: 52365-SH3-014Stock rubber control arm bushings give a disconnected and mushy feel t...

This part fits the following models: Acura Integra Type-R DC2 (1995 - 2000) Honda CRX (1987-1991) Civic Civic Mk5 EG/EJ (1992-1995) Del Sol (1993-1...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This bushing is an insert to be used with the original rubber bushing. It fits Type R models only. Diagram Reference #12 This part fits the follo...

This bushing is an insert to be used with the original rubber bushing. It fits Type R and Si models only. Diagram Reference #14 This part fits th...

Urethane insert to fill the voids in the original rubber engine mount. The original rubber mount is built for absolute noise and vibration suppress...

These urethane performance bushings replace the stock inner rubber upper control arm bushings on the rear of your Honda. With the stock rubber bush...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

These parts only fits the 24mm size anti-roll bar for the Type R 2.0 ltr models.Please check anti-roll bar size before ordering.Polyurethane front ...

These urethane performance bushings replace the stock rubber back bushings on the 8th Gen Civic front lower control arm. Stock rubber control arm b...

These urethane performance bushings replace the stock rubber front bushings on the 8th Gen Civic front lower control arm. Stock rubber control arm ...

With the track-day enthusiast in mind, PFF25-302G Front Arm Rear Bush Camber Adjustable is made in our Black 95A material and has a CNC machined st...

This allows rear camber adjustment of +/-1 degree.Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, esp...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This part fits gear linkages with a 49mm bore. For linkages with a 40mm bore please use PFF63-416.OEM Part Number: 54303SB2010 This part fits the ...

This part fits the following models: Acura Integra Type-R DC2 (1995 - 2000) Honda CRX (1987-1991) Civic Civic Mk5 EG/EJ (1992-1995) Del Sol (1993-1...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Polyurethane rear sway bar bushings for the 2002-2006 7th Gen Honda Civic replace the loose and spongy stock rubber bushings. The urethane bushings...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...