suspension

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

These bushings offer on-car adjustment of the rear camber angles of up to 2 degrees. For a non-adjustable version of this bushing please use PFR3-5...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

For aftermarket control arms (by measurement, see below) usePFF85-410.These urethane performance bushings replace the stock rubber front control ar...

Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA, and for cast arm...

Fits aluminium link rods only, for plastic link rods use PFF85-413. Not for link rods with ball joints on the ends. Diagram Reference #4 This par...

This part fits the following models: Audi A3 A3 Mk1 4WD (1999-2003) A3 Mk1 2WD (1996-2003) S3 S3 Mk1 4WD (1999-2003) TT TT Mk1 2WD (1999-2006) TT M...

This part has been engineered to provide an additional 0.5 degrees positive toe adjustment- useful to correct excessive toe-in on heavily lowered c...

A polyurethane bushing and CNC machined bracket combination kit providing anti-lift and 1° of caster offset. It is designed to complement PFF85-501...

Included in this pack are the following parts;PFF85-501- Front Control Arm Front BushingsPFF85-502- Front Control Arm Rear BushingsPFF85-704- Lower...

Included in this pack are the following parts;PFF85-501- Front Control Arm Front BushingsPFF85-502- Front Control Arm Rear BushingsPFF85-504- Lower...

PFF85-831 replaces the lower half of the original bushing (OEM part number 5Q0 198 037 / 5Q0198 037 A) and includes an insert to fit into and fill ...

This part fits the following models: Audi A3 A3 Mk3 8V w/ Rear Beam Suspension (2013+) A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V...

This part is a insert for OEM part number 5Q0198 037 B.  Use the image below to determine if your car uses Type A (Pre 7/27/2016) or Type B (post 7...

PFF85-833 replaces the lower half of the original bushing (OEM part number 5Q0198 037 B) and includes an insert to fill the voids in the upper bush...

This handling kit is specific to 4WD gas models with cast control arms.Included within this handling pack are the following parts:PFF3-501- Front C...

Fits plastic link rods only, for aluminium link rods use PFF85-412. Not for link rods with ball joints on the ends. This part fits the following m...

Confirm diameter matches that of your sway bar before ordering Diagram Reference #3 This part fits the following models: Audi A3 A3 MK2 8P Inc. Q...

Confirm diameter matches that of your sway bar before ordering Diagram Reference #3 This part fits the following models: Audi A3 A3 MK2 8P Inc. Q...

Confirm diameter matches that of your sway bar before ordering Diagram Reference #3 This part fits the following models: Audi A3 A3 MK2 8P Inc. Q...

Confirm diameter matches that of your sway bar before ordering Diagram Reference #3 This part fits the following models: Audi A3 A3 MK2 8P Inc. Q...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

PFR85-827 Rear Subframe Mount Front Bushings andPFR85-828Rear Subframe Mount Rear Bushings use our Purple 80A durometer material with bonded suppor...

PFR85-827Rear Subframe Mount Front Bushings and PFR85-828 Rear Subframe Mount Rear Bushings use our Purple 80A durometer material with bonded suppo...

Included in this pack are the following parts;PFF85-501- Front Control Arm Front BushingsPFF85-802- Front Control Arm Rear BushingsPFR85-816- Rear ...

Included in the pack are the following parts;PFF85-501- Front Control Arm Front BushingsPFF85-802- Front Control Arm Rear BushingsPFR85-816- Rear T...

A polyurethane bushing and CNC machined bracket combination kit providing anti-lift and 1° of caster offset. It is designed to complement PFF85-501...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits vehicles with a rear bushing diameter of 72.05mm. For vehicles fitted with a rear bushing diameter of 60.05mm, please use PFF85-1702...

This part fits vehicles with a hydraulic rear bushing diameter of 60.05mm. For vehicles fitted with a rear bushing diameter of 72.05mm, please use ...

Diagram reference #4 This part fits the following models: Audi Q7 Q7 (2005-2015) Porsche Cayenne Cayenne (2002-2010) Volkswagen Touareg (02-10) To...

Spacious, modern, and comfortable are all words often used to describe the VW Touareg- but who would have thought that, with an increasing appetite...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #21 This part fits the following models: Volkswagen Eurovan (91-04) Vanagon (80-92) Bumpstops Bumpstops

Diagram Reference #20 / 21 / 22 This part fits the following models: Audi V8 (1988-1993)

Diagram Reference #20 / 21 / 22 This part fits the following models: Audi V8 (1988-1993)

Diagram Reference #21 This part fits the following models: Volkswagen Eurovan (91-04) Vanagon (80-92)

Diagram Reference #20 / 21 / 22 This part fits the following models: Audi V8 (1988-1993)

PF3-1661 is a polyurethane jack pad to fit around and protect the sill, and is designed to help lift stability and location, all while protecting t...

PF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis- providing a fit and forget ...

PF3-1663K Jacking Point Inserts are 95A durometer polyurethane bungs that press up into the vacant holes in the chassis- providing a fit and forget...

PF3-1662 Magnetic Jack Pad is a CNC-machined anodised Jack Pad with a built-in magnet to work with OE lifting adaptors, 8N0803855 and 8N0804583, th...

PFF85-530 is an insert and designed to fill the voiding in the original mount. Diagram Reference #30 This part fits the following models: Audi A3...

Only fits RS3 & TTRS. For other models use PFF85-531. Diagram Reference #31 This part fits the following models: Audi RS3 RS3 MK2 8P (2011-2013)

PFF85-531 is an insert designed to fill the voids of the original bushing. Please check voids of your original mount are the same as the image show...

Only fits AWD models.This polyurethane insert fits into and fills voids in original bracket. This new part is designed to limit excessive movement ...