suspension

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This part fits the following models: Porsche 911 993 (1994-1998) 964 (1989-1994)

Bushing style is D shaped, 22 mm.Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the ...

This part fits the following models: Porsche 911 993 (1994-1998) 964 (1989-1994)

This part fits the following models: Porsche 911 993 (1994-1998) 964 (1989-1994)

This part includes an optional support washer with a built-in insert to fit into the voided bushing for quick and easy tuning of stiffness levels.F...

This part fits the following models: Porsche 911 993 (1994-1998) 964 (1989-1994)

This part fits the following models: Porsche 911 993 (1994-1998) 964 (1989-1994)

This part fits the following models: Porsche 911 993 (1994-1998) 964 (1989-1994)

This part fits the following models: Porsche 911 993 (1994-1998)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This replaces Porsche 911 (993) factory sub frame bushings part numbers 993 331 051 00 / 993 331 051 80 / 993 331 052 00 / 993 331 052 80.  1 kit n...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Powerflex PFR57-526K is full engine set of x6.  Our Engine Intake Sleeve Kit is made with our dark grey 80A durometer polyurethane to enhance durab...

While cosmetically they still look fresh and new, some of them are seeing their age catch up to them a bit. A common failure point on these cars is...

Fits 987.2 and 997.2 with the optional Porsche Active Suspension Management (PASM). Diagram Ref. #1 (997) / #3 (987) This part fits the following P...

Porsche Boxster and Cayman factory front engine mount bushings are particularly prone to cracking because of the large amount of voiding in the rub...

Porsche Boxster and Cayman factory front engine mount bushings are particularly prone to cracking because of the large amount of voiding in the rub...

With impeccably balanced handling, the Porsche 981 & 987.2 Boxster/Cayman inc R are bags of fun to drive, with them rated as being one of the m...

With age and general wear and tear, the OE rubber mounting bushings located within the subframe, commonly degrade and soften causing vague steering...

This bushing kit will fit control arms with the larger 45.8mm internal diameter and replace the original two-piece rubber bushing and cap units.Thi...

When lifting a vehicle with a floor jack or lift, it is critical to make sure that said lifting apparatus fits the vehicle securely. Car manufactur...

This urethane bushing replaces the original rubber bushing in the torque arm mount. The original rubber mount is built for absolute noise and vibra...

Worn OE front subframe bushings can often be the cause of knocking and front end instability.PFF85-1605 Front Subframe Mounting Bushings come in tw...

Protect the underside of your Porsche with our new CNC Machined Aluminium Jack Pad Adapter.While researching the use of Jack Pads on certain vehicl...

When lifting a vehicle with a floor jack or lift, it is critical to make sure that said lifting apparatus fits the vehicle securely. Car manufactur...

*This kit fits both front and rear of the 986 and 996. But only fits the rear of all newer chassis where applicable*Not wanting to fit new bushings...

Not wanting to fit new bushings to old control arms, or can’t justify the expense of buying new arms with rubber bushings - just to immediately rep...

This kit allows for +/- 0.4° adjustment in caster angle, and +/- 0.75° of camber adjustment.Not wanting to fit new bushings to old control arms, or...

*This kit fits both front and rear of the 986 and 996. But only fits the rear of all newer chassis where applicable*This kit allows for 0.4° increa...

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/-1.75 Degrees of camber change. This part fits the fo...

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/-1.75 Degrees of camber change. This part fits the fo...

This part fits the following models: Acura Integra Type-R DC2 (1995 - 2000) RSX Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 SW20 REV 1 (1989-1991)

This part fits the following models: Acura RSX Honda CR-V (2002-2006) Civic Civic Mk7 EP/EU including Si & Type R (2001-2005) Civic Mk7 EP/EU i...

Ford Escort MK5,6 RS2000 4X4 1992-96 Rear Track Rod Inner Bushing by Powerflex

Powerflex's special polyurethane is an advanced material with unique properties. Upgrade your Focus with high performance bushings, bushings that w...

This part fits the following models: Universal Bushings

500g Tub of our specially formulated PTFE/Silicone bushing assembly grease - the only grease recommended for installing Powerflex bushings! This p...

Why have only one engine mount? The Powerflex Tuneable "Hybrid" Urethane & Aluminum engine mounts for the E36, E46, and E90/E92 M3 are configur...

PFF3-913-12 fits Q7 and Bentayga vehicles with 170mm long anti roll bar links with a 12mm bolt. For 10mm bolts use PFF3-913-10.OEM Part Number: 4M0...

When you're working on a GT-R, you want to have the utmost certainty that your lift or jack is firmly holding the car. Made from our Black 95A duro...

These urethane performance bushings replace the stock rubber lower front bushings on the 2011-2018 Range Rover Evoque. Stock rubber control arm bus...