Suspension and Steering

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: Subaru Crosstrek (13-18) Forester Forester (2009-2013) Forester SJ (2012-2018) Impreza / WRX Subaru Impreza In...

This part fits the following models: Subaru Forester Forester (2009-2013) Impreza / WRX Subaru Impreza Incl. WRX & STi (2007-2014) Impreza Turb...

Diagram Reference #11 This part fits the following models: Subaru Forester Forester SF (1997-2002) Forester SG (2002-2008) Impreza / WRX Impreza, ...

This part is described as Rear Subframe Front Outrigger to Chassis Left Side and uses Qty 1 for the applications Subaru Forester SG (2002 - 2008) a...

Fits aftermarket 25mm anti roll bars including Eibach. Please check anti roll bar diameter before ordering.Stiffer sway bar bushings (also commonly...

Diagram Reference #4 This part fits the following models: Saab 9000 (1985-1998)

This partwill notfit OE part number 5232194 that has the bar going through it rather than a bolt (some '98-'99 models only). Diagram Reference #20...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #2 This part fits the following models: Fiat Croma (2005-2011) Saab 9-3 (2003-2014)

500g Tub of our specially formulated PTFE/Silicone bushing assembly grease - the only grease recommended for installing Powerflex bushings! This p...

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/-1.75 Degrees of camber change. This part fits the fo...

This urethane bushing replaces the original rubber bushing in the torque arm mount. The original rubber mount is built for absolute noise and vibra...

Diagram Reference #2 This part fits the following models: Porsche 968 (1992-1995) 944 944 S / S2 (1985-1991)

This part fits 1.6L models, see image below for identification and to confirm before ordering.  PFF46-822 fits 1.6L models, linked at bottom.This p...

PFR44-630 Rear Motor Mount Front Bushing and Bracket is a pre-assembled direct bolt-on replacement for the OEM motor mount, combining our signature...

Please check size before ordering, this is 70.5mm Diameter. For 62mm Diameter use PFF44-107. These mounts are for fast road/competition. These are ...

Diagram Reference #15 This part fits the following models: Mitsubishi Lancer Evolution 4/5/6 (1996-2001) Lancer Evolution 7/8/9 (2001-2007)

Polyurethane front sway bar bushings for the Mercedes 190E and W124 E-class replace the loose and spongy stock rubber bushings. The urethane bushin...

This is an insert to fit into the original mount to limit movement of the engine, providing stability under acceleration. A small increase in noise...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

PFF5-225 Upper Gearbox Mount Insert fills the voiding in the OEM gearbox mount, reducing engine and transmission movement for sharper gear changes ...

VIEW VIDEOThe factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively, and even ...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #6 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)

This insert fits OE part number 22316754424. This part fits the following models: MINI MINI Cooper Gen 1 R50 / R52/ R53 (2001-2006)

This part will not upper engine support brackets on models 2004 onwards if using oil filled engine mounts. This part fits the following models: MI...

Check size to confirm before ordering.This part fits vehicles with a 16mm sway bar diameter.OEM Part Number: 33556754823 This part fits the follow...

Diagram Reference #1 This part fits the following models: MINI MINI Countryman R60 2WD (2010-2015) MINI Countryman R60 4WD (2010-2015) MINI Pacema...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF25-1120 Lower Torque Mount Insertis made using our Purple 80A material and uses our effective prong design to fill the voiding of the OE bush, l...

Check size to confirm before ordering. Diagram Reference #3 This part fits the following models: Honda Element (2003-2011)

This part fits the following models: Honda Exhaust Mounts Exhaust Mounts

This bushing is an insert to be used with the original rubber bushing. It fits Type R models only. Diagram Reference #12 This part fits the follo...

OEM Part Number: 51350-SZT-A03 / 51360-SZT-A03OEM Part Number: 51350-SZT-A02 / 51360-SZT-A02 Diagram Reference #1 This part fits the following mo...

This is a polyurethane insert that fits into and fills voids in the original bushing. For a full replacement bushing, please use PFF19-1820. Diagr...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Check size to confirm before ordering. Diagram Reference #3 This part fits the following models: Ford Focus Focus Mk3 Inc ST (2011+) Focus MK3 RS...

This part fits the following models: Ford Focus Focus Mk1 / ST / RS (1999-2007) Focus Mk2 Inc ST and RS (2005-2010) Exhaust Mounts Exhaust Mounts

Diagram Reference #5 This part fits the following models: Ford Focus Focus Mk1 / ST / RS (1999-2007) Transit Connect (2002-2013)

This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the eng...

Diagram Reference #26 This part fits the following models: BMW 1 Series E82 1 Series (2008-2014) 2 Series F22 2 Series Coupe RWD (2014+) F22 2 Ser...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...