PowerFlex

PF3-1663K Jacking Point Inserts are 95A durometer polyurethane bungs that press up into the vacant holes in the chassis- providing a fit and forget...

PFF85-504 fits standard/mildly tuned gas vehicles and tuned diesel vehicles up to mid-2008. For vehicles from mid-2008 on, use PFF85-704. Diagram ...

This part fits the following models: Audi A3 A3 Mk1 4WD (1999-2003) A3 Mk1 2WD (1996-2003) A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 Mk1 4WD (1999-2...

PF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis- providing a fit and forget ...

Made from our softer Red 65A material for less NVH, PFF85-704R fits standard diesel vehicles from mid-2008 on.For vehicles up to mid-2008, use PFF8...

PFF85-802 uses our Road Series Purple 80 Shore A material and CNC machined steel outer shell to boost stiffness over the original part by almost 10...

Diagram Reference #9 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (2006-2012) RS3 RS3 MK2 8P (2011...

Diagram Reference #10 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (2006-2012) RS3 RS3 MK2 8P (201...

Diagram Reference #4 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (2006-2012) TT TT Mk2 (2007-2014...

This part fits the following models: Audi A3 A3 Mk3 8V w/ Rear Beam Suspension (2013+) A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V...

This part is a insert for OEM part number 5Q0198 037 B.  Use the image below to determine if your car uses Type A (Pre 7/27/2016) or Type B (post 7...

PFF85-833 replaces the lower half of the original bushing (OEM part number 5Q0198 037 B) and includes an insert to fill the voids in the upper bush...

This part fits the following models: Audi A3 A3 Mk3 8V w/ Rear Beam Suspension (2013+) A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V...

Confirm diameter matches that of your sway bar before ordering Diagram Reference #3 This part fits the following models: Audi A3 A3 MK2 8P Inc. Q...

Confirm diameter matches that of your sway bar before ordering Diagram Reference #3 This part fits the following models: Audi S3 S3 MK2 8P (2006-...

Confirm diameter matches that of your sway bar before ordering. Diagram Reference #3 This part fits the following models: Audi S3 S3 MK2 8P (2006...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This bushing features a CNC machined, stainless steel sleeve with an offset bore that can be rotated using our own special tool (supplied) - giving...

Check size to confirm before ordering. This part fits the following models: Audi A3 A3 Mk3 8V w/ Rear Beam Suspension (2013+) A3 Mk3 8V w/ Multi-l...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram reference #18 This part fits the following models: Audi A3 A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V (2013+) RS3 RS3 (2...

Diagram reference #17 This part fits the following models: Audi A3 A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V (2013+) RS3 RS3 (2...

Diagram reference #16 This part fits the following models: Audi A3 A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V (2013+) RS3 RS3 (2...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #13 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) A3 Mk3 8V w/ Multi-link Rear Suspension (201...

These bushings fit 4 wheel drive models only up to 05/25/2012. Diagram Reference #28 This part fits the following models: Audi A3 A3 MK2 8P Inc. ...

These bushings fits 4 wheel drive models only up to 05/25/2012. Diagram Reference #27 This part fits the following models: Audi A3 A3 MK2 8P Inc....

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This bushing fits 4 wheel drive models only where the differential casing front mount measures 35mm in width. The 35mm differential casing mount is...

This bushing fits 4 wheel drive models only where the differential casing measures 30mm in width. The 30mm Differential casing mount is found on AW...

These bushings fit 4WD models only. Diagram Reference #25 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) A3 Mk3 ...

Made using our Purple 80A material, PFF85-704P is recommended for track driven and higher-tuned vehicles from mid-2008 on.For vehicles up to mid-20...

PFF3-905 Lower Engine Mount Small Bushing is a replacement for the often softened and damaged, rubber bushing in the original 'dog bone' shaped bra...

Made using our Yellow 70A material, PFF85-704 is recommended for standard/mildly tuned gasoline engine vehicles and tuned diesel vehicles from mid-...

Diagram Reference #2 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (2006-2012) RS3 RS3 MK2 8P (2011...

Diagram Reference #4 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (2006-2012) TT TT Mk2 (2007-2014...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PF3-1662 Magnetic Jack Pad is a CNC-machined anodised Jack Pad with a built-in magnet to work with OE lifting adaptors, 8N0803855 and 8N0804583, th...

A polyurethane bushing and CNC machined bracket combination kit providing anti-lift and 1° of caster offset. It is designed to complement PFF85-501...

PFF85-831 replaces the lower half of the original bushing (OEM part number 5Q0 198 037 / 5Q0198 037 A) and includes an insert to fit into and fill ...

This part is a insert for OEM part number 5Q0198 037 B.  Use the image below to determine if your car uses Type A (Pre 7/27/2016) or Type B (post 7...

This part fits the following models: Audi A3 A3 Mk3 8V w/ Rear Beam Suspension (2013+) A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V...

This part is a insert for OEM part number 5Q0198 037 B.  Use the image below to determine if your car uses Type A (Pre 7/27/2016) or Type B (post 7...

PFF3-1320 Lower Torque Mount Small Bushing is made using our stiffest Black 95A durometer material, increasing stiffness over the OE rubber bush by...

PFF3-1321 Lower Torque Mount Small Bushing is supplied with an outer shell and made using our stiffest Black 95A durometer material, increasing sti...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...