PowerFlex

When lifting a vehicle with a floor jack or lift, it is critical to make sure that said lifting apparatus fits the vehicle securely. Car manufactur...

Made from Black 95A durometer PU for durability and designed to fit into the original rectangular plastic lifting point, these handy workshop widge...

While cosmetically they still look fresh and new, some of them are seeing their age catch up to them a bit. A common failure point on these cars is...

When lifting a vehicle with a floor jack or lift, it is critical to make sure that said lifting apparatus fits the vehicle securely. Car manufactur...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This urethane bushing replaces the original rubber bushing in the torque arm mount. The original rubber mount is built for absolute noise and vibra...

Diagram Reference #2 This part fits the following models: Porsche 968 (1992-1995) 944 944 S / S2 (1985-1991)

PF57-561K Bolt-On Jack Pad Adaptor Kit is a kit of four anodized CNC-machined 6082-grade aluminum Jack Pads with a 95A durometer anti-slip base tha...

PF75-1002 is a more cost-effective variant of our Tesla jackpad PF75-1001. Designed for those who aren’t lifting their car every single day to work...

With age and general wear and tear, the OE rubber mounting bushings located within the subframe, commonly degrade and soften causing vague steering...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This is a D shaped bushing, 21 mm.Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the...

Only fits AWD models.This polyurethane insert fits into and fills voids in original bracket. This new part is designed to limit excessive movement ...

Diagram reference #4 This part fits the following models: Audi Q7 Q7 (2005-2015) Porsche Cayenne Cayenne (2002-2010) Volkswagen Touareg (02-10) To...

This part fits vehicles with a rear bushing diameter of 72.05mm. For vehicles fitted with a rear bushing diameter of 60.05mm, please use PFF85-1702...

Spacious, modern, and comfortable are all words often used to describe the VW Touareg- but who would have thought that, with an increasing appetite...

This part fits vehicles with a hydraulic rear bushing diameter of 60.05mm. For vehicles fitted with a rear bushing diameter of 72.05mm, please use ...

Diagram Reference #1 This part fits the following models: Porsche 924 incl S, 944 (1982-1985.5) Volkswagen Golf Golf Mk1 (1973-1985) Jetta Jetta M...

Worn OE front subframe bushings can often be the cause of knocking and front end instability.PFF85-1605 Front Subframe Mounting Bushings come in tw...

Porsche Boxster and Cayman factory front engine mount bushings are particularly prone to cracking because of the large amount of voiding in the rub...

Bushing style is D shaped, 22 mm.Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the ...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Check size to confirm before ordering. Diagram Reference #3 This part fits the following models: Porsche 968 (1992-1995) 944 944 S / S2 (1985-1991)

Fits 997.5s with manual and PDK gearbox's with a single bush in the end casing- except for Turbo GT2 & GT3 models which use PFR57-531. Does not...

PFF57-802 allows the caster angle to be adjusted on-car.Bushing Length (with metal sleeve):60mm This part fits the following models: Porsche 911 9...

OEM Part Number: 996343792Size - 27mm This part fits the following models: Porsche 911 996 (1997-2005)

Diagram Reference #3 This part fits the following models: Audi A4 A4 B5 2WD Incl. Avant (1994-2001) A4 B5 Quattro Incl. Avant (1995-2001) A4 B6 2W...

Please check the sway bar diameter before ordering.  Diagram Reference #10 This part fits the following Porsche models: 911 997 (2005-2012) Bo...

Please check the sway bar diameter before ordering.   Diagram Reference #10 This part fits the following Porsche models: 911, 997 (2005-2012) B...

Fits 987.2 and 997.2 with the optional Porsche Active Suspension Management (PASM). Diagram Ref. #1 (997) / #3 (987) This part fits the following P...

Fits 987.2 and 997.2 with the optional Porsche Active Suspension Management (PASM). Diagram Ref. #1 (997) / #3 (987) This part fits the following P...

Powerflex PFR57-526K is full engine set of x6.  Our Engine Intake Sleeve Kit is made with our dark grey 80A durometer polyurethane to enhance durab...

Powerflex PFR57-414 Transmission Carrier Bushings to fill a hole in our pre-1972 911/912 catalog. These are offered in our 80A durometer Heritage m...

This bushing kit will fit control arms with the larger 45.8mm internal diameter and replace the original two-piece rubber bushing and cap units.Thi...

Check size to confirm before ordering. Diagram Reference #13 This part fits the following models: Porsche 928 (1978-1995)

OEM Part Number: 91134101800 Diagram Reference #6 This part fits the following models: Porsche 911 911 (1987-1989) 911 Turbo (1978-1989) 911 (197...

Please check sway bar diameter before ordering! Diagram Reference #4 This part fits the following models: Porsche 911 911 (1969-1973) 911 (1967-1...

If fitting these bushings to a Corrado (89-95), it only fits VR6 models. For non VR6 models, use PFF85-203. Diagram Reference #2 This part fits t...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF3-913-12 fits Q7 and Bentayga vehicles with 170mm long anti roll bar links with a 12mm bolt. For 10mm bolts use PFF3-913-10.OEM Part Number: 4M0...

*This kit fits both front and rear of the 986 and 996. But only fits the rear of all newer chassis where applicable*This kit allows for 0.4° increa...

This kit allows for +/- 0.4° adjustment in caster angle, and +/- 0.75° of camber adjustment.Not wanting to fit new bushings to old control arms, or...

Not wanting to fit new bushings to old control arms, or can’t justify the expense of buying new arms with rubber bushings - just to immediately rep...

*This kit fits both front and rear of the 986 and 996. But only fits the rear of all newer chassis where applicable*Not wanting to fit new bushings...

With impeccably balanced handling, the Porsche 981 & 987.2 Boxster/Cayman inc R are bags of fun to drive, with them rated as being one of the m...

Porsche Boxster and Cayman factory front engine mount bushings are particularly prone to cracking because of the large amount of voiding in the rub...