Smart Products Filter Index - Do not delete

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF66-201 has 52mm O.D. at the rear of the bushing, and fits models prior to the 2000 model year. Diagram Reference #2 This part fits the followi...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This replaces the original 2 piece design. For the single piece design please use PFF66-503-*. Diagram Reference #3 This part fits the following ...

OEM Part Number: 13247174This part does not fit convertible models. Diagram Reference #31 This part fits the following models: Saab 9-3 (2003-2014)

Diagram Reference #30 This part fits the following models: Saab 9-3 (2003-2014)

Fits Ranger Rover Sport with Ace Suspension.  See PFF32-403-30 for Range Rover Sport without Ace Suspension.Stiffer sway bar bushings (also commonl...

Fits Range Rover Sport 2005 to 2013 Models with Ace Suspension only.Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings)...

OEM Part Number: RGX000060 Diagram Reference #10 This part fits the following models: Land Rover Range Rover L322 (2002-2012)

OEM Part Number:RGX000071 Diagram Reference #11 This part fits the following models: Land Rover Range Rover L322 (2002-2012)

These urethane performance bushings replace the stock front rubber lower inner control arm bushings on the 2002-2012 Range Rover models. Stock rubb...

This part fits the following models: Acura RSX Honda CR-V (2002-2006) Civic Civic Mk7 EP/EU including Si & Type R (2001-2005) Civic Mk7 EP/EU i...

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/-1.75 Degrees of camber change. This part fits the fo...

Worn OE front subframe bushings can often be the cause of knocking and front end instability.PFF85-1605 Front Subframe Mounting Bushings come in tw...

Bushing style is D shaped, 22 mm.Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the ...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Check size to confirm before ordering. Diagram Reference #3 This part fits the following models: Porsche 968 (1992-1995) 944 944 S / S2 (1985-1991)

Fits 997.5s with manual and PDK gearbox's with a single bush in the end casing- except for Turbo GT2 & GT3 models which use PFR57-531. Does not...

PFF57-802 allows the caster angle to be adjusted on-car.Bushing Length (with metal sleeve):60mm This part fits the following models: Porsche 911 9...

Fits manual gearbox with a single bushing in the end casing except for Turbo GT2 & GT3 models which use PFR57-531. Does not fit Generation 2 99...

OEM Part Number: 996343792Size - 27mm This part fits the following models: Porsche 911 996 (1997-2005)

Please check sway bar diameter before ordering.

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #4 This part fits the following models: Nissan Sunny/Pulsar GTiR (1990-1994)

This part fits the following models: Nissan 240SX (1989-1999) Skyline R33 Including GT-R, GTS, GTS-T (1993-1998) Skyline R32 2WD Including GTS, GXI...

This part fits 1.8L models, see image below for identification and to confirm before ordering.  PFF46-821 fits 1.6L models, linked at bottom.This p...

Fits S14/S15 models onlyOEM Part Number: 54613-65F06OEM Part Number: 54613-4P006OEM Part Number: 54613-4P007Size 25mm This part fits the following...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Non adjustable, for camber on-car adjustable bushings use PFF44-401G.Stock rubber control arm bushings give a disconnected and mushy feel to the fr...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Size - 80mm Diameter This part fits the following models: Mercedes-Benz E Class E-Class A207 (2010-2017) E-Class C207 (2010-2017) E-Class W212 (20...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #6 This part fits the following models: Mazda RX-7 (1992-2002)

Diagram Reference #7 This part fits the following models: MINI MINI Countryman R60 4WD (2010-2015) MINI Paceman R61 4WD (2013+)

Designed to replace the softer rubber voided OE mount that is prone to cracking, allowing for excessive engine movement and wheel hop, PFF5-220 Low...

This bushing increases the negative camber by -1.25°.If fitting PFF5-132G we recommend  fitting PFF5-101G to bring the caster back to standard. Th...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF5-1302G Front Arm Rear Bush Caster Offset is a CNC-machined Aluminium mount with polyurethane bushing providing approximately 1 deg of caster of...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #1 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)

This part does not replace the engine mount bushing.PFF5-124 is a quick and easy way to stiffen the OE oil-filled engine mount, improving throttle ...

PFR5-1104 is a complete bushing. It fits later Gen1 models from 2003 onwards with a diameter of 60mm, for the earlier models with a diameter of 80m...