Best Selling

Designed to replace the softer rubber voided OE mount that is prone to cracking, allowing for excessive engine movement and wheel hop, PFF5-220 Low...

Diagram Reference #1 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)

Diagram Reference #7 This part fits the following models: MINI MINI Countryman R60 4WD (2010-2015) MINI Paceman R61 4WD (2013+)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Made using our stiffest Black 95A Durometer Polyurethane with in-house CNC-machined stainless-steel adjustable sleeves and matched adjusting spanne...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

PFF5-1302G Front Arm Rear Bush Caster Offset is a CNC-machined Aluminium mount with polyurethane bushing providing approximately 1 deg of caster of...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part does not replace the engine mount bushing.PFF5-124 is a quick and easy way to stiffen the OE oil-filled engine mount, improving throttle ...

VIEW PRODUCT VIDEOAn anodized CNC-Machined 6082 aluminum mount pre-fitted with polyurethane bushings, for a true bolt-off, bolt-on replacement - no...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This replaces the complete original bushing in bracket. If you would like to fit an insert only then please usePFF5-107. This bushing comes with an...

PFF5-107 is an insert that fits into the original bushing. For full bushing replacement, seePFF5-120 This part fits the following models: MINI MIN...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This part fits 1.8L models, see image below for identification and to confirm before ordering.  PFF46-821 fits 1.6L models, linked at bottom.This p...

Diagram Reference #4 This part fits the following models: Nissan Sunny/Pulsar GTiR (1990-1994)

Non adjustable, for camber on-car adjustable bushings use PFF44-401G.Stock rubber control arm bushings give a disconnected and mushy feel to the fr...

Diagram Reference #6 This part fits the following models: Mazda RX-7 (1992-2002)

Diagram Reference #20 This part fits the following models: Lotus Elise S2 / 111R (2001-2011) Exige S2 (2004-2011)

Diagram Reference #21 This part fits the following models: Lotus Elise S2 / 111R (2001-2011) Exige S2 (2004-2011)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Only fits AWD models.This polyurethane insert fits into and fills voids in original bracket. This new part is designed to limit excessive movement ...

Diameter: 65mmThis part fits arms with a 65mm diameter bushing, for 75mm bushings, please use PFF3-702. This is a replacement part that, in our Str...

Suitable for 12mm bolts.Check size to confirm before ordering. This part fits the following models: Bentley Continental GT (2003-2011) Volkswagen ...

Diagram Reference #3 This part fits the following models: Audi A4 A4 B5 2WD Incl. Avant (1994-2001) A4 B5 Quattro Incl. Avant (1995-2001) A4 B6 2W...

Check bolt diameter, this bushing uses a 10mm bolt. For bushings with a 12mm bolt use PFF3-121-12.Must order PFF3-120-10 to do entire front or rear...

Check bolt diameter, this bushing uses a 10mm bolt. For bushings with a 12mm bolt use PFF3-120-12.Must order PFF3-121-10 to do entire front or rear...

This bushing fits stamped steel front arms with 37mm bushings. For cast arms with 45mm bushings, use PFF3-102. Diagram Reference #1 or 5 This par...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

These parts only fits the 24mm size anti-roll bar for the Type R 2.0 ltr models.Please check anti-roll bar size before ordering.Polyurethane front ...

Diagram Reference #6 This part fits the following models: Honda S2000 (1999-2009)

This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. Diagram Reference #5 This part fits...

Diagram Reference #8 This part fits the following models: Ford Escort Cosworth (1992-1996)

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

PFF19-1222 fits early models, PFF19-1220 fits later models, please check image for compatibility. If fitting this to a diesel engine vehicle, an in...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #24 This part fits the following models: Alfa Romeo 145, 146, 155 164 & Twin Spark Fiat Coupe (1993-2001)

These bushings are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the...

OE Part Number -51805863Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the ...

This part fits the following models: Acura RSX Honda CR-V (2002-2006) Civic Civic Mk7 EP/EU including Si & Type R (2001-2005) Civic Mk7 EP/EU i...

This part fits the following models: Universal Bushings Universal Parallel Bushings

This part fits the following models: Universal Bushings Universal Top Hat Bushings

PF75-1001 Jack Pad Adaptor combines our durability-biased polyurethane with a 95A base pad and an in-house CNC machined High-Tensile grade 2011 alu...

Made from Black 95A durometer PU for durability and designed to fit onto an 80mm jack saddle, and into the original rectangular plastic lifting poi...