Best Selling

Bushing style is D shaped, 22 mm.Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the ...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Check size to confirm before ordering. Diagram Reference #3 This part fits the following models: Porsche 968 (1992-1995) 944 944 S / S2 (1985-1991)

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

BMW E39 model fitments for Standard suspension only.  27 mm size.Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) re...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

BMW E39 model fitments for M Sport II type suspension only.  BMW E46 fitment for all 3 series.  23 mm size.Stiffer sway bar bushings (also commonly...

This part is not recommended for cars being used on track or for competition. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required...

Diagram Reference #1 This part fits the following models: BMW 3 Series E30 3 Series (1984-1991) E36 3 Series (1992-1999) E36 318Ti (1995-1999) Z S...

Fits F54 through F60 MINI models, and F39 through F49 BMW models.The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass...

Designed to replace the softer rubber voided OE mount that is prone to cracking, allowing for excessive engine movement and wheel hop, PFF5-220 Low...

Diagram Reference #1 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)

Diagram Reference #7 This part fits the following models: MINI MINI Countryman R60 4WD (2010-2015) MINI Paceman R61 4WD (2013+)

Made using our stiffest Black 95A Durometer Polyurethane with in-house CNC-machined stainless-steel adjustable sleeves and matched adjusting spanne...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

PFF5-1302G Front Arm Rear Bush Caster Offset is a CNC-machined Aluminium mount with polyurethane bushing providing approximately 1 deg of caster of...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part does not replace the engine mount bushing.PFF5-124 is a quick and easy way to stiffen the OE oil-filled engine mount, improving throttle ...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This replaces the complete original bushing in bracket. If you would like to fit an insert only then please usePFF5-107. This bushing comes with an...

PFF5-107 is an insert that fits into the original bushing. For full bushing replacement, seePFF5-120 This part fits the following models: MINI MIN...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This part fits 1.8L models, see image below for identification and to confirm before ordering.  PFF46-821 fits 1.6L models, linked at bottom.This p...

Diagram Reference #4 This part fits the following models: Nissan Sunny/Pulsar GTiR (1990-1994)

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Non adjustable, for camber on-car adjustable bushings use PFF44-401G.Stock rubber control arm bushings give a disconnected and mushy feel to the fr...

Size - 22mm This part fits the following models: Mercedes-Benz C Class C-Class W203 (2001-2007) CLK CLK W209 (2002-2009)

This is an insert to fit into the original mount to limit movement of the engine, providing stability under acceleration. A small increase in noise...

Diagram Reference #6 This part fits the following models: Mazda RX-7 (1992-2002)

Diagram Reference #20 This part fits the following models: Lotus Elise S2 / 111R (2001-2011) Exige S2 (2004-2011)

Diagram Reference #21 This part fits the following models: Lotus Elise S2 / 111R (2001-2011) Exige S2 (2004-2011)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Only fits AWD models.This polyurethane insert fits into and fills voids in original bracket. This new part is designed to limit excessive movement ...

Diameter: 65mmThis part fits arms with a 65mm diameter bushing, for 75mm bushings, please use PFF3-702. This is a replacement part that, in our Str...

Suitable for 12mm bolts.Check size to confirm before ordering. This part fits the following models: Bentley Continental GT (2003-2011) Volkswagen ...

Diagram Reference #3 This part fits the following models: Audi A4 A4 B5 2WD Incl. Avant (1994-2001) A4 B5 Quattro Incl. Avant (1995-2001) A4 B6 2W...

Check bolt diameter, this bushing uses a 10mm bolt. For bushings with a 12mm bolt use PFF3-121-12.Must order PFF3-120-10 to do entire front or rear...

Check bolt diameter, this bushing uses a 10mm bolt. For bushings with a 12mm bolt use PFF3-120-12.Must order PFF3-121-10 to do entire front or rear...

This bushing fits stamped steel front arms with 37mm bushings. For cast arms with 45mm bushings, use PFF3-102. Diagram Reference #1 or 5 This par...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

These parts only fits the 24mm size anti-roll bar for the Type R 2.0 ltr models.Please check anti-roll bar size before ordering.Polyurethane front ...

Please check anti roll bar diameter before ordering.OEM Part Number: C1BC-5484-DAOEM Part Number: 2002588OEM Part Number: K1BC-5484-ABSize - 21mmSt...

This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. Diagram Reference #5 This part fits...

Diagram Reference #8 This part fits the following models: Ford Escort Cosworth (1992-1996)