Skip to content
Mazdaspeed6 Full Motor Mount Set
$ 590.00

Mazdaspeed6 Full Motor Mount Set

Original price $ 590.00 - Original price $ 590.00
Original price
$ 590.00
$ 590.00 - $ 590.00
Current price $ 590.00
Mount Color: Black
Bushing Color: Red
Bushing Stiffness: Race

The Damond Motorsports Full Motor Mount Set for the Mazdaspeed6 is here! Get your car fully mounted with our specially designed mounts that hold the motor solidly in place while adding only minimal levels NVH.  

 

The Damond Motorsports RMM/PMM/TMM design:

  • The bushings are orientated properly to support the motor and absorb vibrations across the whole bushing.
  • This allows us to use stiff bushings without increasing NVH to unbearable levels. Orientating the bushing carrier in a transverse manner further reduces NVH, as less stress is put on bushing flanges.
  • Full length welded steel PMM/TMM bases, and top PMM/TMM pieces. 
  • CAD designed, and FEA, and street/track tested. You can't make enough power to break this thing.


The Damond Motorsports RMM/PMM/TMM specs:

  • Made in the U.S.A.
  • Machined aluminum bushing carrier, anodized gold or black, and black anodized RMM 
  • PMM/TMM lower mount bases and PMM/TMM top bases are high strength steel welded, and super thick gloss black powder coating
  • All high grade fasteners, and nylon lock nuts
  • OTS Energy poly bushings
  • Minimal added vibes, improved shifting feel

NEW! Bushing stiffness options! 

  • Street 70a or Race 88a bushing stiffness now available
  • Street bushings are for those looking to keep added NVH to a minimum
  • Race bushings are for those wanting the best performance and least engine movement
  • Bushing selection currently only applies to the side mounts. In full mount sets, the rear mount uses the "race" bushings

 Free US Shipping!

Customer Reviews

Based on 13 reviews
100%
(13)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Christian Aszman
Awesome

Even with full race bushings the vibration really isn't bad at all

J
JORDI
Excellent motor mounts

I am developing approximately 442 ft-lbs on my mazdaspeed 6. I have deleted the balance shaft. I needed some motor mounts that would hold the motor in place and not cause too much shaking. It is my car I use every day. The Damond motor mount kit, with shore 70A on the sides and 88A on the RMM has been an impressive choice. The motor stays firmly in place and there is very little vibration. Daily driving is perfect. Thank you Damond for the advice and for making such efficient products.

D
Damian Arzeta
Clean as fuck

Quality welding and qaulity feeling to the parts. I removed the old motor mounts and were complete dogshit compared to these ones!

P
Paul D
Essentially zero vibes and I haven't broke them in yet!

I used to have AWR side and trans mounts, Street Unit rear mount. And I had balance shaft delete. The vibes were just horrible. I wouldn't want to have passengers in the car as it was so embarrassing. I f'ed up the engine and hadn't driven the car in literally 5 years. I had it my garage. I finally decided to either poop or get off the pot and get the car built. I wanted a strong car, but, I wanted it to be a decent daily driver too. So, I switched the mounts to Damond, full set. And new engine I left the balance shaft installed. I simply drove it home, about 20 miles. But, the vibes were almost nonexistent.

Now, there is a little at idle, but then again, the engine idles a bit rough. Not bad, but a bit rough. I think the slight rough idle is because I have Kelford cams, 4" intake, JMF manifold, Corksport throttle body. All that is to allow mass quantities of air at power, but slightly sacrifices idle smoothness. The point I'm getting to, I think that if the engine was idling smooth, there would probably be literally no vibes at all. Literally literally none.

Now, I know that Damond's are generally regarded as the best, but, other people do seem to report more vibes than me. So, your mileage might vary somewhat. After I ordered the set, I read the reviews here of just the rear mount by itself, and several of the reviews indicated moderate vibes. I started to consider getting the CPE rear as at least some people say that is the best rear mount. But now, after experiencing the full Damond set, I am sold on it!

Z
Zach Knisley
Best mounts you can buy

These mounts speak for themselves. Anyone will tell.you these are the best available for the mazdaspeed platform. Damond has provided a great product. These mounts have been track tested over and over and also are common in the high hp builds for our platform. Your likely gonna find these will outlast most of the other mounts.