The Damond Motorsports Oil Catch Can kits come with everything needed for an optimized Oil Catch Can system. An oil catch can is, in a sense, a filter for the positive crankcase ventilation system. The oil catch can(OCC for short) is used to tap and contain blow-by oils and condensed crankcase gases, that would otherwise flow throughout the PCV system back into the intake tract, and allows for draining of these fluids remotely. With the addition of an OCC kit, blow-by oils and gasses are routed to the OCC, allowing them to be captured. This prevents the blow-by from entering the intake system, where it would otherwise contaminate the clean air entering the engine. Cleaner air leads to better combustion, more power, better fuel economy, less detonation, and less oily build-up on the valves.Ā
What sets the Damond Motorsports OCC kits apart from the rest, is that we fully test our OCC components, to insure the best OCC set-up for your vehicle. Only high quality components are used in the Damond Motorsports OCC kits. Our OCC kits come tailored to fit your Fiesta ST perfectly, for a no-hassle, quick and simple instillation. We utilize the same quick connectors Ford uses, to ensure a factory-tight seal, as well as an easy install. All the fittings and hoses are pre-assembled on our end, so there's less work for you..
Every DM OCC kit includes a check valve(at no additional cost), to prevent boost from possibly entering the crankcase, via the prone to leaking OEM PCV valve. The check valve allows for a 1-way operation of the OCC system, keeping everything under vacuum, to better help vent the crankcase, and keep unwanted pressure and blow-by from exiting the valve cover port.
Ā
The DM Fiesta STĀ OCC kit connects into the intake manifold/valve cover PCV connection. Most oily blow-by contaminates travel this path from boost into vacuum transitions, where crankcase pressure has the potential to be greater, then the systemĀ immediatelyĀ turns to a slight vacuum. This causes a fine oily mist that would otherwise flow into the intake manifold. With the DM OCC kit in place, the hoses route the blow-by to the OCC, where they can be filtered and cleaner air is sent back into the manifold. In turn theĀ primaryĀ benefitsĀ are: cleaner air mixture, and less oilyĀ build-up on the valves and in the intake manifold. Ā
Thanks to the feedback and support from our customers, we now have hose sleeving available for the Fiesta ST OCC kit. The sleeves are a nylon braid, intended to protect the hoses from rubbing against other components. While the hoses included in our kits feature multiple layers, these sleeves offer extra peace of mind to prevent the outer layers of the hoses from rubbing in this tight engine bay. Available now for only $10.Ā
Included in each Damond Motorsports OCC kit:
-A Damond Motorsports OCCĀ
-OEM quick-connect hose connectors
-Quick-opening/high-flowing check valve, assembled/sealed with fittings
-Pre-cut oil and vacuum resistant hoses, fully assembled with fittings (black,Ā blue, orĀ red)
-Location specific bracket, and mounting hardware to mount the OCCĀ
-Slim stainless steel hose clamps
-Zip ties to keep the hoses at bay
-Drain barb and hose included
-optional nylon hose sleeves
Ā
The DM OCC features:
-Fully welded external aluminum structure. Welded on ports for a nice clean look, and to keep weight at a minimum.Ā
-Layers and layers and layers of perforated baffle plates, allowing a large surface area for blow-by vapors to latch onto and keep the intake tract clean. The bottom layer features an oil scraper. Blow-by is forced directly onto the scraper, while the air is pushed around the sides of the can to the back of the lower chamber. The air is then drawn up diagonally through 3 more perforated plates, before it exits the top chamber.Ā
-A super easy to use high flowing drain valve.Ā
-Powder coated for enhanced durability.Ā
Ā
Free US shipping!Ā
Please note, this kit does not fit RHD models.Ā
Took maybe 1/2 hour to install. My tuner recommended getting one since I was going big turbo, and the only one he recommended was Damon Motorsports. Looks great, installs easy, fast shipping, what else can you ask for. Recommend to anyone looking for an oil catch can kit.
I was amazed by the quality and engineering that went into this catch can. It took less than 30 minutes to install, the fit is precise. Not sure why people had a hard time getting the bolt into the firewall that hold the catch can in place it was the easier part of the install. Hose length and fit was perfect.
I have run the catch can now for about 300 miles and is already doing itās job!
Great product, great fit, and easiest install ever. Must buy!
Overall best Iāve seen and worked with. Easy install and super easy to use. Looks better than most too.
Very good quality part. Easy installation
Very well built piece, and install was simple. My only issue was getting the nylon sleeves all the way on, since they kept snagging and hanging up against the rubber hoses. It takes longer to watch the install video than it does to actually install it.
Love this catch can, very easy to install, it does a great job of catching blow by, solid product, and very good looking also
Well built design and love the install location, which is the reason why I purchased this kit. The only negative I can say is that I also purchased the tube covers, but was only able to install one of the two covers due to the metal piece clasps. Iād recommend this purchase but wouldnāt bother with the additional cover.
Shipping- came super fast.
All the components seem to be made to a very high standard. Install is pretty simple. Took me less than 30 minutes. I have big hands, so getting to the drain valve is difficult, but I think I'll just unmount the catch can to drain it. A little inconvenience, but I can live with it.
Really easy to install and there are a lot of good YT videos to help the only issue was the mounting bracket and getting the bolt threaded for it but other than that it took maybe 30 minutes!
Great quality kit, very easy install (about 15mins).. I went with the black and it gives it an almost factory appearance under the hood, very happy with this kit!
Excellent quality components, good online instructions, and excellent customer service from Matt.
Iāve been babying this car for the first 1000 miles- Now I can beat on the car and not feel guilty!
We shall see how much crap this thing collects. Little tough to reach the drain valve is the only negative- small hands are a must!
Just verify the majority of reviews here. The parts are very high quality and the installation was very easy. Compared to other kits out there, I think I prefer the mounting location for this one.
I gave it a 3 out of 5 star rating because the 3 stars are for the quality and completeness of the kit and the 2 missing stars are for the bracket that mounts in the back of the st motor, the install was easy until it came to mounting the bracket for the catch can. There is 00 room for tools let alone hands so it added another 30 minutes of trying to figure out how to fit the bracket and tighten everything down while dealing with absolutely no hand or tool room, while on top of that it comes with no instructions on which way the bracket installs so I had to google pictures of past customers who had the kit installed and see how they had it mounted up so that added another 15 minutes. Would I buy it again? Yess āONLYā for the quality, I do think Damond needs to go back to the drawing board on a mounting location for the catch can, and not completely sure why they donāt add instructions on mounting and which way the bracket goes? I coulda saved 45 extra minutes had these 2 things Had they put alil more thought into it, but peel itās on Iām happy now end of rant. Hope this helps!
Hi, sorry if you had troubles installing the kit! All of our install guides are on our website(the little thank you card included with your order explains that), and we can be contacted if there's any install issues via phone, email, or the chat on our site. Here's a direct link to the guide: https://damondmotorsports.com/blogs/guides/116619396-damond-motorsports-fiesta-st-oil-catch-can-kit-installation-guide
Super easy install, took all of 20 minutes. I do recommend the nylon hose sleeves and quick drain valve. Iāve yet to drain it initially but having had DM OCCās on my speed 3 I know his products work well and are top notch quality.
Came across a You Tube about the need for the oil catch can by accident and did some more research, came to conclusion, it is needed.
Damond's was built best and priced very reasonably. Car runs sweet and makes engine bay just that much cooler!
I used Damond's OCC on my Focus so when it came time to buy one for my new FiST it was a no brainer! Great quality and no fitment issues at all. Super easy install too.
I could not ask for a better quality product, along with a slick look, you canāt get any better than this.
Easy to install and maintain. Iām looking forward to the next oil change to see how much oil it catches.
I bought this catch can system because my internal pcv check valve was leaking after speaking with Damond customer support their catch can system would be a fix to my issue and it was. Installation was quick and easy, quality of the product is excellent, even got some free stickers in the box thank you!
Fast shipping and good quality
