powerflex

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF3-1321 Lower Torque Mount Small Bushing is supplied with an outer shell and made using our stiffest Black 95A durometer material, increasing sti...

PFF3-1320 Lower Torque Mount Small Bushing is made using our stiffest Black 95A durometer material, increasing stiffness over the OE rubber bush by...

Confirm diameter matches that of your sway bar before ordering Diagram Reference #3 This part fits the following models: Audi A3 A3 MK2 8P Inc. Q...

This part is a insert for OEM part number 5Q0198 037 B.  Use the image below to determine if your car uses Type A (Pre 7/27/2016) or Type B (post 7...

This pack fits the following vehicles, fitted with OEM lower engine mount 5Q0 198 037 B:Audi TT Mk3 (after 06/2015)Audi A3 8V (after 06/2015) 1.8 o...

PFF3-1323 Upper Engine Mount Insert is made in our Yellow 70A durometer and is designed to fill the voiding present in the original rubber mounts. ...

PFF3-1322 Upper Gearbox Mount Insert is made in our Yellow 70A durometer and is designed to fill the voiding present in the original rubber mounts....

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #2 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (2006-2012) RS3 RS3 MK2 8P (2011...

Made using our Yellow 70A material, PFF85-704 is recommended for standard/mildly tuned gasoline engine vehicles and tuned diesel vehicles from mid-...

Made using our Purple 80A material, PFF85-704P is recommended for track driven and higher-tuned vehicles from mid-2008 on.For vehicles up to mid-20...

PFF3-905 Lower Engine Mount Small Bushing is a replacement for the often softened and damaged, rubber bushing in the original 'dog bone' shaped bra...

This bushing fits 4 wheel drive models only where the differential casing measures 30mm in width. The 30mm Differential casing mount is found on AW...

This bushing fits 4 wheel drive models only where the differential casing front mount measures 35mm in width. The 35mm differential casing mount is...

These bushings fit 4WD models only. Diagram Reference #25 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) A3 Mk3 ...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #10 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (2006-2012) RS3 RS3 MK2 8P (201...

Diagram Reference #9 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (2006-2012) RS3 RS3 MK2 8P (2011...

These bushings fits 4 wheel drive models only up to 05/25/2012. Diagram Reference #27 This part fits the following models: Audi A3 A3 MK2 8P Inc....

These bushings fit 4 wheel drive models only up to 05/25/2012. Diagram Reference #28 This part fits the following models: Audi A3 A3 MK2 8P Inc. ...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #13 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) A3 Mk3 8V w/ Multi-link Rear Suspension (201...

Check size to confirm before ordering. This part fits the following models: Audi A3 A3 Mk3 8V w/ Rear Beam Suspension (2013+) A3 Mk3 8V w/ Multi-l...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram reference #18 This part fits the following models: Audi A3 A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V (2013+) RS3 RS3 (2...

Diagram reference #17 This part fits the following models: Audi A3 A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V (2013+) RS3 RS3 (2...

Diagram reference #16 This part fits the following models: Audi A3 A3 Mk3 8V w/ Multi-link Rear Suspension (2013+) S3 S3 Mk3 8V (2013+) RS3 RS3 (2...

This bushing features a CNC machined, stainless steel sleeve with an offset bore that can be rotated using our own special tool (supplied) - giving...

OEM Part Number: 1K0498884 Diagram Reference #7 This part fits the following models: Audi A3 A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 MK2 8P (200...

A polyurethane bushing and CNC machined bracket combination kit providing anti-lift and 1° of caster offset. It is designed to complement PFF85-501...

Included in this pack are the following parts;PFF85-501- Front Control Arm Front BushingsPFF85-502- Front Control Arm Rear BushingsPFF85-704- Lower...

This part is a insert for OEM part number 5Q0198 037 B.  Use the image below to determine if your car uses Type A (Pre 7/27/2016) or Type B (post 7...

PFF85-833 replaces the lower half of the original bushing (OEM part number 5Q0198 037 B) and includes an insert to fill the voids in the upper bush...

PFR85-827 Rear Subframe Mount Front Bushings andPFR85-828Rear Subframe Mount Rear Bushings use our Purple 80A durometer material with bonded suppor...

PFR85-827Rear Subframe Mount Front Bushings and PFR85-828 Rear Subframe Mount Rear Bushings use our Purple 80A durometer material with bonded suppo...

PF3-1661 is a polyurethane jack pad to fit around and protect the sill, and is designed to help lift stability and location, all while protecting t...

PF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis- providing a fit and forget ...

PF3-1663K Jacking Point Inserts are 95A durometer polyurethane bungs that press up into the vacant holes in the chassis- providing a fit and forget...

PF3-1662 Magnetic Jack Pad is a CNC-machined anodised Jack Pad with a built-in magnet to work with OE lifting adaptors, 8N0803855 and 8N0804583, th...

PFF85-530 is an insert and designed to fill the voiding in the original mount. Diagram Reference #30 This part fits the following models: Audi A3...

Only fits RS3 & TTRS. For other models use PFF85-531. Diagram Reference #31 This part fits the following models: Audi RS3 RS3 MK2 8P (2011-2013)