Powerflex

The Powerflex BMW & Mini jack pad adapter is designed to fit into the plastic lifting points found on your BMW and Mini.  It helps with lift st...

PFF5-4655 is a transmission mount that will fit many different models of BMW throughout the years. This is available in 3 different versions.Street...

This part fits the following models: Acura RSX Audi S2/RS2 S2, RS2 B4 (1994-1996) Honda CR-V (2002-2006) Civic Civic Mk7 EP/EU including Si & T...

This part fits the following models: Acura Integra Type-R DC2 (1995 - 2000) RSX Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 SW20 REV 1 (1989-1991)

Diagram Reference #2 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Diagram Reference #1 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Fits aftermarket 25mm anti roll bars including Eibach. Please check anti roll bar diameter before ordering.Stiffer sway bar bushings (also commonly...

Diagram Reference #25 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Diagram Reference #30 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Diagram Reference #31 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Diagram Reference #21 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Diagram Reference #21 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Diagram Reference #20 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Diagram Reference #20 This part fits the following models: Scion FR-S (2012+) Subaru BRZ Toyota 86 / GT86 (2012+)

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Made using our stiffestBlack 95Adurometer materialin combination with our in-houseCNC Machinedstainless steel sleeve, this new bush is a direct rep...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: Scion FR-S (2012+) Subaru BRZ Forester Forester (2009-2013) Impreza / WRX Subaru Impreza Incl. WRX & STi (...

This part fits the following models: Scion FR-S (2012+) Subaru BRZ Forester Forester (2009-2013) Impreza / WRX Subaru Impreza Incl. WRX & STi (...

MUST BE USED IN CONJUNCTION WITHPFR69-511G This part fits the following models: Scion FR-S (2012+) Subaru BRZ Forester Forester (2009-2013) Imprez...

MUST BE USED IN CONJUNCTION WITHPFR69-510G This part fits the following models: Scion FR-S (2012+) Subaru BRZ Forester Forester (2009-2013) Imprez...

This part fits the following models: Scion FR-S (2012+) Subaru BRZ Forester Forester (2009-2013) Impreza / WRX Subaru Impreza Incl. WRX & STi (...

"PFF5-5452 Engine Mount InsertÊisÊa two-piece kit made using our RedÊ65A durometer material, designed to fill the void of the OE rubber mount to li...

PFF5-5401 is made using our Black 95A durometer material and supplied with anodized aluminum outer shells to increase bushing stiffness by up to 30...

PFF5-5401G is made using our Black 95A durometer material and supplied with anodized aluminum outer shells to increase bush stiffness by 300%, cont...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

One bushing equates to 4 PU parts and is enough to do one side of the vehicle. This part fits the following models: Toyota Corolla AE86 RWD (1983-...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

One bushing equates to 2 PU parts and is enough to do one side of the vehicle. This part fits the following models: Toyota Corolla AE86 RWD (1983-...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #20 This part fits the following models: Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 SW20 REV 1 (1989-1991)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #8 This part fits the following models: Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 SW20 REV 1 (1989-1991)

This bushing has an outer diameter of79mm. Diagram Reference #9 This part fits the following models: Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 S...

Diagram Reference #8 This part fits the following models: Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 SW20 REV 1 (1989-1991)

Diagram Reference #8 This part fits the following models: Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 SW20 REV 1 (1989-1991)