powerflex

This part fits the following models: Acura RSX Audi S2/RS2 S2, RS2 B4 (1994-1996) Honda CR-V (2002-2006) Civic Civic Mk7 EP/EU including Si & T...

31.6mm diameter bushing. This part fits the following models: Nissan 240SX (1989-1999)

35mm diameter bushing. This part fits the following models: Nissan 240SX (1989-1999)

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Fits S14/S15 models onlyOEM Part Number: 54613-65F06OEM Part Number: 54613-4P006OEM Part Number: 54613-4P007Size 25mm This part fits the following...

Fits S14/S15 models onlyOEM Part Number: 54613-65F06OEM Part Number: 54613-4P006OEM Part Number: 54613-4P007Size - 27mm This part fits the followi...

PFF46-218 fits 2WD Skyline models only. For AWD models, use PFF46-219.Stock rubber control arm bushings give a disconnected and mushy feel to the f...

PFR46-204G are on car adjustable bushings to replace all the rear upper arm bushings allowing camber adjustment of +/-1.5 deg. PFR46-204 are non ad...

These fit all Skyline R32/R33/R34 Models exc. HICAS. These fit all S13/S14/S15 Models exc. HICAS.Stock rubber control arm bushings give a disconnec...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFR46-210 fits S14/S15 & R33/R34 only - Bushing length 50mm with an OD of 31.25mm. For 200SX S13 & Skyline R32 models use PFR46-203 - Bushi...

These parts are full replacement bushings. If you require inserts to be used in conjunction with the original bushings instead, please use PFR46-21...

These are Non-Adjustable. For Camber Adjustable bushings, use PFR46-204G. - These fit all Skyline R32/R33/R34 Models excluding HICAS. - These fit a...

Powerflex differential mount bushings reduce unwanted and excessive rear axle movement, especially during hard driving and abrupt on/off throttle. ...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF46-701 is a reinforced replacement bushing that is 39% stiffer than the original bush to increase performance. For a camber adjustable version o...

PFF46-702G is a CNC machined aluminium mount to provide anti-lift and caster offset. These beautiful parts ship with specially designed self-aligni...

This bush has additional caster built in.This part replaces OEM Part Number: 5452462B0A / 562B0A / 54524JF00C; 5JF00C / 54524JF50A / 5JF50A Diagra...

PFR46-732 Rear Differential-to-Subframe Mounting Bushings use our Purple 80A durometer bushing material alongside CNC-machined aluminum and steel c...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This part fits 1.6L models, see image below for identification and to confirm before ordering.  PFF46-822 fits 1.6L models, linked at bottom.This p...

This part fits 1.8L models, see image below for identification and to confirm before ordering.  PFF46-821 fits 1.6L models, linked at bottom.This p...

This part replaces OEM Part Number: 113501KC0A This part fits the following models: Nissan Juke (2011+)

PFF60-8026 Lower Torque Mount features a CNC machined and laser-etched aluminum bracket, combining our Yellow 70A and Purple 80A durometer material...

PFF60-8027 Lower Torque Mount features a CNC machined and laser-etched aluminum bracket, combining our Yellow 70A and Purple 80A durometer material...

PFF46-219 fits AWD Skyline models only. For 2WD models, use PFF46-218. This part fits the following models: Nissan 240SX (1989-1999) 300ZX (1990-1...

This part fits the following models: Nissan 240SX (1989-1999) Skyline R33 Including GT-R, GTS, GTS-T (1993-1998) Skyline R32 2WD Including GTS, GXI...

Diagram Reference #4 This part fits the following models: Nissan Sunny/Pulsar GTiR (1990-1994)

Diagram Reference #11 This part fits the following models: Nissan Sunny/Pulsar GTiR (1990-1994)

Diagram Reference #10 This part fits the following models: Nissan Sunny/Pulsar GTiR (1990-1994)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #9 This part fits the following models: Nissan Sunny/Pulsar GTiR (1990-1994)

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

When you're working on a GT-R, you want to have the utmost certainty that your lift or jack is firmly holding the car. Made from our Black 95A duro...