Suspension and Steering

PF57-561K Bolt-On Jack Pad Adaptor Kit is a kit of four anodized CNC-machined 6082-grade aluminum Jack Pads with a 95A durometer anti-slip base tha...

PF75-1002 is a more cost-effective variant of our Tesla jackpad PF75-1001. Designed for those who aren’t lifting their car every single day to work...

Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop l...

Born on the track, but equally at home on the road, the G8X M2, M3, and M4 beautifully embody the moniker that BMW created long ago — “The Ultimate...

This part fits steering racks measuring50mmin diameter. For47mmdiameter steering racks, usePFF76-613. This part fits the following models: Toyota ...

With age and general wear and tear, the OE rubber mounting bushings located within the subframe, commonly degrade and soften causing vague steering...

This is a D shaped bushing, 21 mm.Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the...

PFR46-732 Rear Differential-to-Subframe Mounting Bushings use our Purple 80A durometer bushing material alongside CNC-machined aluminum and steel c...

PFF5-224provides an excellent balance of strength and compliance for improved performance, while limiting NVH transmission into the cabin.Available...

This part fits the following models: MINI MINI Cooper Gen 1 R50 / R52/ R53 (2001-2006)

This is an insert to fit into the original mount to limit movement of the engine to provide stability under acceleration. This should be considered...

This bushing features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/...

"PFF5-5452 Engine Mount InsertÊisÊa two-piece kit made using our RedÊ65A durometer material, designed to fill the void of the OE rubber mount to li...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF73-520 Lower Engine Mount Insert Bushing is an easy-to-fit solution designed to fill the voiding of the original rubber mount, helping reduce tr...

This part fits the following models: Universal Bushings

OE Part Number -A132C6012FPolyurethane sway bar bushings for the Lotus Evora replace the loose and spongy stock rubber bushings. The urethane bushi...

Diagram Reference #21 This part fits the following models: Lotus Elise S2 / 111R (2001-2011) Exige S2 (2004-2011)

Diagram Reference #20 This part fits the following models: Lotus Elise S2 / 111R (2001-2011) Exige S2 (2004-2011)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

OEM Part Number: RBX101730 Diagram Reference #9 This part fits the following models: Land Rover Discovery Discovery II (1999-2004)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

OE Part Number -552818Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. R...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #20 This part fits the following models: Volvo 850, S70, V70 (-2000) C70 (1998-2004) S60 AWD (2001-2009) S60, V70, S80 (2000-200...

Diagram Reference #13 This part fits the following models: Volvo S60 AWD (2001-2009) S60, V70, S80 (2000-2007) XC XC70 (2002-2007)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF88-611 fits5 cylinder models only. Diagram Reference #11 This part fits the following models: Volvo 850, S70, V70 (-2000) S60 AWD (2001-2009) ...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: Volkswagen Corrado Golf Golf Mk2 (1985-1992) Golf Mk2 Syncro 4WD (1985-1992) Golf Mk3 2WD (1992-1998) Jetta Je...

BS008 fits the rear of the following vehicles Volkswagen Corrado (1989 - 1995) Volkswagen Golf Mk 3 (1992-1998) Volkswagen Golf Mk2 (1985-1992) Vol...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #3 This part fits the following models: Volkswagen Vanagon (80-92)

Diagram Reference #7 This part fits the following models: Volkswagen Vanagon (80-92)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #6 This part fits the following models: Volkswagen Vanagon (80-92)

Suitable for 12mm bolts.Check size to confirm before ordering. This part fits the following models: Bentley Continental GT (2003-2011) Volkswagen ...

Made from our softer Red 65A material for less NVH, PFF85-704R fits standard diesel vehicles from mid-2008 on.For vehicles up to mid-2008, use PFF8...

Check size to confirm before ordering. This part fits the following models: Audi A3 A3 Mk3 8V w/ Rear Beam Suspension (2013+) A3 Mk3 8V w/ Multi-l...

PFF85-802 uses our Road Series Purple 80 Shore A material and CNC machined steel outer shell to boost stiffness over the original part by almost 10...

Diagram Reference #7 This part fits the following models: Volkswagen Golf Golf Mk2 Syncro 4WD (1985-1992) Golf Mk3 4WD Syncro (1993-1997) Passat P...