Suspension and Steering

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This replaces the original 2 piece design. For the single piece design please use PFF66-503-*. Diagram Reference #3 This part fits the following ...

Diagram Reference #2 This part fits the following models: Fiat Croma (2005-2011) Saab 9-3 (2003-2014)

PFR25-430 Rear Shock Absorber Top Mounting Bush is made from our Yellow 70A Durometer material for improved durability, performance, making for a f...

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/-1.75 Degrees of camber change. This part fits the fo...

This urethane bushing replaces the original rubber bushing in the torque arm mount. The original rubber mount is built for absolute noise and vibra...

Porsche Boxster and Cayman factory front engine mount bushings are particularly prone to cracking because of the large amount of voiding in the rub...

Diagram Reference #2 This part fits the following models: Porsche 968 (1992-1995) 944 944 S / S2 (1985-1991)

This part fits 1.6L models, see image below for identification and to confirm before ordering.  PFF46-822 fits 1.6L models, linked at bottom.This p...

PFR44-630 Rear Motor Mount Front Bushing and Bracket is a pre-assembled direct bolt-on replacement for the OEM motor mount, combining our signature...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Please check size before ordering, this is 70.5mm Diameter. For 62mm Diameter use PFF44-107. These mounts are for fast road/competition. These are ...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #15 This part fits the following models: Mitsubishi Lancer Evolution 4/5/6 (1996-2001) Lancer Evolution 7/8/9 (2001-2007)

Size - 22mm This part fits the following models: Mercedes-Benz C Class C-Class W203 (2001-2007) CLK CLK W209 (2002-2009)

These urethane performance bushings replace the stock rubber lower control arm bushings on the Mercedes W202 C-class, W208 CLK, and R170 SLK models...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

VIEW VIDEOThe factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively, and even ...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

Diagram Reference #6 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)

PFR5-1103 is a complete bushing kit that fits into trailing arm brackets with OE numbers: 33306799089 33306799090, 33309807099 and 3330980710. For ...

This insert fits OE part number 22316754424. This part fits the following models: MINI MINI Cooper Gen 1 R50 / R52/ R53 (2001-2006)

This part will not upper engine support brackets on models 2004 onwards if using oil filled engine mounts. This part fits the following models: MI...

Check size to confirm before ordering.This part fits vehicles with a 16mm sway bar diameter.OEM Part Number: 33556754823 This part fits the follow...

Diagram Reference #1 This part fits the following models: MINI MINI Countryman R60 2WD (2010-2015) MINI Countryman R60 4WD (2010-2015) MINI Pacema...

*These bushings will not fit AWD XJ models*Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This is a replacement caster adjustment bolt and collar kit will that fit either the standard Honda bushing, or our PFF25-203. It is a high-quality...

Diagram Reference #16 This part fits the following models: Honda S2000 (1999-2009)

Check size to confirm before ordering. Diagram Reference #3 This part fits the following models: Honda Element (2003-2011)

This bushing is an insert to be used with the original rubber bushing. It fits Type R models only. Diagram Reference #12 This part fits the follo...

PFF5-1322 Gearbox Moun Bushing Insert is made using the Yellow 70A durometer material and has been designed to fill the voids in the OE mount for a...

This part fits the following models: Acura RSX Audi S2/RS2 S2, RS2 B4 (1994-1996) Honda CR-V (2002-2006) Civic Civic Mk7 EP/EU including Si & T...

This is a polyurethane insert that fits into and fills voids in the original bushing. For a full replacement bushing, please use PFF19-1820. Diagr...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #5 This part fits the following models: Ford Focus Focus Mk1 / ST / RS (1999-2007) Transit Connect (2002-2013)

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Please check anti roll bar diameter before ordering.OEM Part Number: C1BC-5484-DAOEM Part Number: 2002588OEM Part Number: K1BC-5484-ABSize - 21mmSt...

OEM Part Number: For shock absorber 51857840 - 51857841 - 51857842OEM Part Number: For shock absorber 51857843 - 51860150 - 51864833,OEM Part Numbe...

Kit comes supplied with M14 mounting bolt, thread locker, and a Powerflex keyring.With the newer F8x M2/M3/M4's making big power and having superb ...

PFR5-4026 Is a replacement bushing that features a built-in support washer, providing further stability of the diff under acceleration. This part ...

Diagram Reference #26 This part fits the following models: BMW 1 Series E82 1 Series (2008-2014) 2 Series F22 2 Series Coupe RWD (2014+) F22 2 Ser...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This part fits the following models: BMW 5 Series F10 528i/535i/550i RWD (2011-2016) F10 528xi/535xi/550xi xDrive AWD (2011-2016) 6 Series F06/F13 ...

This part fits the following models: BMW 5 Series F10 528xi/535xi/550xi xDrive AWD (2011-2016) 6 Series F06/F13 640xi/650xi xDrive AWD (2012-2018)