Suspension and Steering

OE Part Number -701513121Fits the upper position of the front damper on T3 vehicles where quantity per car equals 2. Fits the lower position of the...

Diagram Reference #15 This part fits the following models: Volkswagen Vanagon (80-92)

Diagram Reference #11 This part fits the following models: Volkswagen Golf Golf Mk1 (1973-1985) Jetta Jetta Mk1 (79-84) Scirocco (73-92) Rabbit Tr...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This part fits the following models: Audi A3 A3 Mk1 4WD (1999-2003) A3 Mk1 2WD (1996-2003) A3 MK2 8P Inc. Quattro (2003-2012) S3 S3 Mk1 4WD (1999-2...

PF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis- providing a fit and forget ...

Diagram Reference #21 This part fits the following models: Volkswagen Eurovan (91-04) Vanagon (80-92)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This handling kit is specific to 4WD gas models with cast control arms.Included within this handling pack are the following parts:PFF3-501- Front C...

This part fits the following models: Audi A3 A3 Mk1 4WD (1999-2003) A3 Mk1 2WD (1996-2003) S3 S3 Mk1 4WD (1999-2003) TT TT Mk1 2WD (1999-2006) TT M...

Diagram Reference #8 or 11 This part fits the following models: Volkswagen Corrado Golf Golf Mk2 (1985-1992) Golf Mk2 Syncro 4WD (1985-1992) Golf ...

BS006 fits the front of the following vehicles. The OE dust cover fits this bump stop. Volkswagen Corrado (1989 - 1995) Volkswagen Golf Mk 3 (1992-...

Diagram Reference #6 This part fits the following models: Volkswagen Corrado Golf Golf Mk2 (1985-1992) Golf Mk2 Syncro 4WD (1985-1992) Golf Mk3 2W...

Fits 2WD models only.PFR85-415 has been superseded with PFR85-610. Diagram Reference #4 or 5 This part fits the following models: Audi A1 A1 8X (...

PF99-1001 is a polyurethane jack pad, designed to help lift stability and location, whilst protecting the underside of your vehicle. PFF99-1001 is ...

This part fits the following models: Audi A3 A3 Mk1 4WD (1999-2003) A3 Mk1 2WD (1996-2003) S3 S3 Mk1 4WD (1999-2003) Volkswagen Golf Golf Mk3 4WD S...

This part fits the following models: Exhaust Mounts Exhaust Mounts

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #8 This part fits the following models: Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 SW20 REV 1 (1989-1991)

Diagram Reference #8 This part fits the following models: Toyota MR2 SW20 REV 2 to 5 (1991-1999) MR2 SW20 REV 1 (1989-1991)

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: Subaru Crosstrek (13-18) Forester Forester (2009-2013) Forester SJ (2012-2018) Impreza / WRX Subaru Impreza In...

This part fits the following models: Subaru Forester Forester (2009-2013) Impreza / WRX Subaru Impreza Incl. WRX & STi (2007-2014) Impreza Turb...

Diagram Reference #11 This part fits the following models: Subaru Forester Forester SF (1997-2002) Forester SG (2002-2008) Impreza / WRX Impreza, ...

This part is described as Rear Subframe Front Outrigger to Chassis Left Side and uses Qty 1 for the applications Subaru Forester SG (2002 - 2008) a...

Fits aftermarket 25mm anti roll bars including Eibach. Please check anti roll bar diameter before ordering.Stiffer sway bar bushings (also commonly...

Diagram Reference #4 This part fits the following models: Saab 9000 (1985-1998)

This partwill notfit OE part number 5232194 that has the bar going through it rather than a bolt (some '98-'99 models only). Diagram Reference #20...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #2 This part fits the following models: Fiat Croma (2005-2011) Saab 9-3 (2003-2014)

500g Tub of our specially formulated PTFE/Silicone bushing assembly grease - the only grease recommended for installing Powerflex bushings! This p...

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/-1.75 Degrees of camber change. This part fits the fo...

This urethane bushing replaces the original rubber bushing in the torque arm mount. The original rubber mount is built for absolute noise and vibra...

Diagram Reference #2 This part fits the following models: Porsche 968 (1992-1995) 944 944 S / S2 (1985-1991)

This part fits 1.6L models, see image below for identification and to confirm before ordering.  PFF46-822 fits 1.6L models, linked at bottom.This p...

PFR44-630 Rear Motor Mount Front Bushing and Bracket is a pre-assembled direct bolt-on replacement for the OEM motor mount, combining our signature...

Please check size before ordering, this is 70.5mm Diameter. For 62mm Diameter use PFF44-107. These mounts are for fast road/competition. These are ...

Diagram Reference #15 This part fits the following models: Mitsubishi Lancer Evolution 4/5/6 (1996-2001) Lancer Evolution 7/8/9 (2001-2007)

Polyurethane front sway bar bushings for the Mercedes 190E and W124 E-class replace the loose and spongy stock rubber bushings. The urethane bushin...

This is an insert to fit into the original mount to limit movement of the engine, providing stability under acceleration. A small increase in noise...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

PFF5-225 Upper Gearbox Mount Insert fills the voiding in the OEM gearbox mount, reducing engine and transmission movement for sharper gear changes ...

VIEW VIDEOThe factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively, and even ...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...