Suspension and Steering

This part fits the following models: Nissan 240SX (1989-1999) Skyline R33 Including GT-R, GTS, GTS-T (1993-1998) Skyline R32 2WD Including GTS, GXI...

This part fits 1.8L models, see image below for identification and to confirm before ordering.  PFF46-821 fits 1.6L models, linked at bottom.This p...

This bush has additional caster built in.This part replaces OEM Part Number: 5452462B0A / 562B0A / 54524JF00C; 5JF00C / 54524JF50A / 5JF50A Diagra...

PFF46-701 is a reinforced replacement bushing that is 39% stiffer than the original bush to increase performance. For a camber adjustable version o...

Fits S14/S15 models onlyOEM Part Number: 54613-65F06OEM Part Number: 54613-4P006OEM Part Number: 54613-4P007Size 25mm This part fits the following...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Non adjustable, for camber on-car adjustable bushings use PFF44-401G.Stock rubber control arm bushings give a disconnected and mushy feel to the fr...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

OEM Part Number - 2033231140Please check sway bar size and bracket shape before ordering.Size - 23mm This part fits the following models: Mercedes...

Polyurethane front sway bar bushings for the Mercedes 190E and W124 E-class replace the loose and spongy stock rubber bushings. The urethane bushin...

Size - 80mm Diameter This part fits the following models: Mercedes-Benz E Class E-Class A207 (2010-2017) E-Class C207 (2010-2017) E-Class W212 (20...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #6 This part fits the following models: Mazda RX-7 (1992-2002)

Size - 20MM This part fits the following models: Maserati 3200GT (1988 - 2002)

Diagram Reference #7 This part fits the following models: MINI MINI Countryman R60 4WD (2010-2015) MINI Paceman R61 4WD (2013+)

Designed to replace the softer rubber voided OE mount that is prone to cracking, allowing for excessive engine movement and wheel hop, PFF5-220 Low...

This bushing increases the negative camber by -1.25°.If fitting PFF5-132G we recommend  fitting PFF5-101G to bring the caster back to standard. Th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF5-1302G Front Arm Rear Bush Caster Offset is a CNC-machined Aluminium mount with polyurethane bushing providing approximately 1 deg of caster of...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #1 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)

This part does not replace the engine mount bushing.PFF5-124 is a quick and easy way to stiffen the OE oil-filled engine mount, improving throttle ...

PFR5-1104 is a complete bushing. It fits later Gen1 models from 2003 onwards with a diameter of 60mm, for the earlier models with a diameter of 80m...

PFF5-107 is an insert that fits into the original bushing. For full bushing replacement, seePFF5-120 This part fits the following models: MINI MIN...

This replaces the complete original bushing in bracket. If you would like to fit an insert only then please usePFF5-107. This bushing comes with an...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

OEM Part Number: 33326768726OEM Part Number: 33326768724 This part fits the following models: MINI MINI Cooper Gen 1 R50 / R52/ R53 (2001-2006) MI...

Fits F54 through F60 MINI models, and F39 through F49 BMW models.The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass...

VIEW PRODUCT VIDEOAn anodized CNC-Machined 6082 aluminum mount pre-fitted with polyurethane bushings, for a true bolt-off, bolt-on replacement - no...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #3 / 5 This part fits the following models: Jaguar XJ XJ40 (1986-1994) XJ6, XJ6R - X300 - X306 (1994-1997)

OEM Part Number: XR19697Size - 32.5mm Diagram Reference #4 This part fits the following models: Jaguar F Type (2013+) S Type S Type (1998-2002) S...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Diagram Reference #6 This part fits the following models: Honda S2000 (1999-2009)

These parts only fits the 24mm size anti-roll bar for the Type R 2.0 ltr models.Please check anti-roll bar size before ordering.Polyurethane front ...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...