THIS KIT IS BACK! Save over $600 vs the factory cooler line part number: GP9E32410C
The Damond Motorsports Power Steering Cooler Kit, for the 06-07 Mazdaspeed6, is ideal for lowering power steering temperatures on the track and the street. Our Power Steering Cooler Kits utilize a stacked plate cooler design, over a tube and fin design. The stacked plate cooler design can provide more effective cooling with a smaller sized cooler, and it is more durable, compared to tube and fin design coolers. During our testing, on a smaller cooler (50% less surface area than the coolers in the kits), we achieved 15-25% cooler fluid temperatures, depending on the air flow to the cooler.Ā
We offer the kit in 2 configurations:
Ā
Ā
Worth every penny. Instructions are detailed and easy to interpret & customer service top notch. If your old cooler is leaking or you're just tired of looking at lays chips- replace it. It also works with my FMIC. Great product
Great company to deal with. Order was shipped promptly. The cooler instructions were a bit vague and the photo angles need to be updated to an angle that the home installer would view from which would be from the left wheel well not from underneath the car. To the less mechanically inclined it would more difficult to understand. I figured it out without problems and the install was pretty easy. This cooler is definitely lower cost than the OEM cooler. I would recommend this cooler kit over another universal cooler since this kit comes with everything you need to mount.
I bought this cooler to replace the stock cooler that had corroded and started to leak. The unit is well made and was easy to fit using the instructions provided (note: it can be fitted without removing the airbox resonator if you prefer to retain it) and I was able to buy it and have it shipped to the U.K. faster and at a significantly lower cost than the stock part from Mazda.
Recomend this product 100% for mazdaspeed6/3
I had a front end collision on my 2007 Mazdaspeed 6 and the front hard line that going to the oil cooler was kinked in the damage and the OEM does not sell that tube without the entire oil filter cooler set that costs nearly 4 times what this part costs. Installing was very easy in the OEM locations and I was able to get my car running and driving afterwards!
Iām glad there is a option to replace those leaking oem power steering coolers.
Used to replace the OEM leaking pipe, good price shipped to the UK. Not sure if a cable tied rubber power steering pipe is allowed for MOT in UK?
My old power steering cooler was not only rusted and falling apart it also started to leak. After a quick search I realized the cooler and hardline will be quite an expansive fix. That was until I saw this power steering cooler kit. It is great quality and a very affordable way to fix a leak in your power steering system! And since my car sees occasional track use the lower oil temps are a plus as well. 100% would recommend this kit. If you have little experience working on your car it shouldn't be too hard to install with a few hours with some basic hand tools. The write up installation instructions had some great reference points for the installation.
Definitely a great product. Easy to install, my only issue is there should be another bracket to hold the other side of the cooler. Other than that pretty good. Love the customer service they looked out for me so much when fed ex stole my package and said it was delivered. You guys are awesome š¤š½
High quality cooler - much better than original. The installation was a bit fiddly but it all went together properly. Huge $avings compared to OEM parts.
(Updated) It is a great piece. Cheaper than the stock part and works much better. I wish I had bought the added hose for front hard-line replacement. I didn't really know if I should or shouldn't, so I didn't. Turns out, you either need to re-use one of the stock pieces of rubber hose, or buy a new stock one, or replace the whole front hard-line. I wound up buying a new stock piece of hose, which of course cost more than if I had just bought the added hose. As I was reading the install directions, at first it didn't even make sense that we would reuse that stock hose. We were replacing that section so why would be reusing it? Well, it just so happens that the stock piece of hose on one end is shaped well to be used on the other end. I suppose you could also just use a straight piece of hose rather than the stock part. But given the stock piece is shaped well, it does a good job. Unless you replace the whole front hard-line and then you don't need it. I was having a hard time removing the hose support bracket. I was trying to get at it from under the car and wrapping my hand in awkward position and couldn't get it. Then it dawned on me that going at it from the wheel side would be much easier. Of course probably nobody else would have been as dumb as me.
Great customer service and support staff from end to end. The kit itself had high quality materials and finish but the connections included were not the correct size. Included were 3/8th fittings, required 1/2.
Hi, sorry if you had troubles installing the kit! The install guide details how the system connects. All of our install guides are on our website(the little thank you card included with your order explains that), and we can be contacted if there's any install issues via phone, email, or the chat on our site. Here's a direct link to the guide: https://damondmotorsports.com/blogs/guides/116741124-damond-motorsports-mazdaspeed6-power-steering-cooler-kit-install-guide
clear directions,well made thanks
and saved me about 400$ over the original Mazda part. gonna use Diamond again and again. thanks!!
Product works as advertised, easy installation procedure, and a great alternative to OEM PS components. Recommend purchasing the additional hose. DM never disappoints in service and quality, highly recommended product!
Inexpensive price, does a great job. I'm curious as to what the cooler was originally designed for. It's basically designed like oil or transmission coolers, but much smaller than those typically are. It is big enough for the job at hand, I'm not complaining. And I know Damond sells a similar unit with a bigger cooler. But it's not necessary for most people. I'm just curious as to what the original purpose was. In any case, he gives you the parts you need to mount it and is so much better than stock.
This kit was a God send after getting quote from Mazda for their OEM replacement. Mechanic who does maintenance on my '07 Speed6 had to do a bit of cutting and fitting(not due to Damond kit)but due to aftermarket intake kit which intruded on area where kit was to fit.
Ordered kit after some correspondence with DS and kit arrived very quickly and in good order. I would unequivocally recommend DS for product quality, good communication, fast shipping and the price on this kit was a MEGA saving over what Mazda wanted.
Bravo, Damond Motorsports!
I was very impressed with the quality of the kit provided. Iām not a mechanic so I couldāve used slightly better directions for the layperson but thatās just my fault. I will look for more products from these people for my ms6.
very nice build quality on this kit and for the price i can't grumble.
the radiator installed fine but upon trying to install the line it was very tricky trying to get the rubber hose onto a 12mm pipe with a ridge on it. 8mm over 14mm or so is a big ask in the first place but with string in the rubber (reinforced as it should be) i was destroying the inside of the pipe trying to fit it.
What we did was cut the lines on the car and trimmed the plastic sheathing back, then put a 12mm to 10mm compression fitting on it with around 70mm of 10mm pipe sticking out of the fitting and with an olive compressed onto the end of it to make a ridge. then it was just a question of putting the pipe over and using the existing jubilee clips to secure the line in place at the radiator end and the 'car' end.
a bit Heath Robinson by my standards but no bearing on the kit. Its a lot easier than replacing all the lines especially the line that goes under the driveshaft.
for the price and the usability of the kit it gets top marks from me.
The OEM power steering cooler had tons of holes in it and I replaced it with the Damond powering steering cooler this weekend. Great product and I do not have to worry about continuing to fill my power steering reservoir every few days. High quality and I totally recommend.
Looks and feels like a quality product. Steering feels great. I installed this because my factory cooler started leaking and Mazda wanted $400+ dollars for stock replacement. IMO great upgrade for a quarter of the cost. Install took awhile but I was also doing it with a floor jack in my gravel driveway making it difficult to reach the spring clips.
So far I love all the damond parts I have installed and plan on purchasing many more. The ms6 platform is very limited and you guys are a shining beacon of quality and hope for future products. Keep up the good work guys!
This is a really cool product. Its a super reasonably priced fix and upgrade for a known weak spot in the Speed6 universe. The stock cooler is a known leak spot, and rusts super easy. This thing not only adds an actual cooler- stock is just circle fins that get crusty- but gives you flexible routing of the PS lines. This is basically a necessity for a front mount IC with the Damond ST mani kit. Anyways, highly recommend.
Not the easiest install, and I think I was missing a couple of the hose clamps in the kit, but pretty straightforward. Instructions were very helpful. For a power steering upgrade at a fraction of the cost of an OEM replacement, this is a great option if your factory cooler is corroded/leaking, like mine was.
great experience, a bit of a tricky instalation had a hard time finding instruction and pictures of other peoples mounted but i had mine in within an hour works great now and a way cheaper option then going the oem mazda power steering line
This is a great piece of mind product that is easy to install. I did this upgrade the same time as a planned fluid swap and everything feels great. I would recommend this to anyone interested in improving their steering feel and longevity.
Great custolmer service. I was told one of the hoses was out of stock so shipping would be delayed a day. They made up for it by upgrading the shipping for free and I received it even faster than I would have with my original shipping optoption. Product was also great!
