Here at Damond Motorsports we offer a variety of fuel injectors to help meet your fueling needs. Whether you're adding our Mazdaspeed PI adapter plate, or converting to an ST intake manifold with our PI adapter, we've got your fueling covered!
Our adapter kits are suited for either 48mm or 34mm length injectors, and Injector Dynamics 48mm injectors can easily be converted to 34mm length by removing the installed spacer. To discuss which injectors we'd recommend for your power goals, please contact us. All injector kits are sold in sets of 4.
Injector Dynamics Injectors:
Injector Dynamics ID1050X: (most recommended)
- Nominal Flow Rate – 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
- Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
- Fuel Compatibility – Compatible With All Known Fuels
- Electrical Connector – USCAR
Injector Dynamics ID1300X:
-
Nominal Flow Rate – 1335cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
-
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
-
Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
-
Electrical Connector – USCAR
Injector Dynamics ID1700X:
-
Nominal Flow Rate – 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F)
-
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
-
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
-
Electrical Connector – USCAR
Injector Dynamics ID2600XDS:
-
Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)
-
Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.
-
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro Methane
-
Electrical Connector – USCAR
Free US Shipping!
NOTE: These injectors are NOT factory replacements for the direct injection injectors. These are to be used with additional or supplemental fueling.
