Skip to content
Free US shipping on Damond Motorsports brand products and most orders over $150
Free US shipping on DM products and most orders over $150

Focus ST Oil Catch Can kit Stage 1

Original price $ 205.00 - Original price $ 210.00
Original price
$ 205.00
$ 205.00 - $ 210.00
Current price $ 205.00
Hose color: Black
Mounting location: Location 1
Product Description

The Damond Motorsports Oil Catch Can kits come with everything needed for an optimized Oil Catch Can system. An oil catch can is, in a sense, a filter for the positive crankcase ventilation system. The oil catch can(OCC for short) is used to tap and contain blow-by oils and condensed crankcase gases, that would otherwise flow throughout the PCV system back into the intake tract, and allows for draining of these fluids remotely. With the addition of an OCC kit, blow-by oils and gasses are routed to the OCC, allowing them to be captured. This prevents the blow-by from entering the intake system, where it would otherwise contaminate the clean air entering the engine. Cleaner air leads to better combustion, more power, better fuel economy, less detonation, and less oily build-up on the valves. 

What sets the Damond Motorsports OCC kits apart from the rest, is that we fully test our OCC components, to insure the best OCC set-up for your vehicle. Only high quality components are used in the Damond Motorsports OCC kits. Our OCC kits come tailored to fit your Focus ST perfectly, for a no-hassle, quick and simple instillation. We utilize the same quick connectors Ford uses, to ensure a factory-tight seal, as well as an easy install. All the fittings and hoses are pre-assembled on our end, so there's less work for you. And we use push-lock fittings, ensuring a tight seal that requires no need for tons of hose clamps.

Every DM Stage 1 OCC kit includes a check valve(at no additional cost), to prevent boost from possibly entering the crankcase, via the prone to leaking OEM PCV valve. The check valve allows for a 1-way operation of the OCC system, keeping everything under vacuum, to better help vent the crankcase, and keep unwanted pressure and blow-by from exiting the valve cover port.
 
The DM Stage 1 OCC kit connects into the intake manifold/PCV valve hose connection. Most oily blow-by contaminates travel this path from boost into vacuum transitions, where crankcase pressure has the potential to be greater, then the system immediately turns to a slight vacuum. This causes a fine oily mist that would otherwise flow into the intake manifold. With the DM Stage 1 OCC kit in place, the hoses route the blow-by to the OCC, where they can be filtered and cleaner air is sent back into the manifold. In turn the primary benefits are: cleaner air mixture, and less oily build-up on the valves and in the intake manifold.  

Included in each Damond Motorsports Stage 1 OCC kit:
-A Damond Motorsports OCC 
-OEM quick-connect hose connectors
-Quick-opening/high-flowing check valve, assembled/sealed with fittings
-Pre-cut oil and vacuum resistant hoses, fully assembled with fittings (black, blue, or red)
-Location specific bracket, and mounting hardware to mount the OCC off the intake manifold or under the air cleaner box
-Slim stainless steel hose clamps
-Zip ties to keep the hoses at bay
-Drain barb and hose included

The DM OCC features:
-Fully welded external aluminum structure. Welded on ports for a nice clean look, and to keep weight at a minimum. 
-Layers and layers and layers of perforated baffle plates, allowing a large surface area for blow-by vapors to latch onto and keep the intake tract clean. The bottom layer features an oil scraper. Blow-by is forced directly onto the scraper, while the air is pushed around the sides of the can to the back of the lower chamber. The air is then drawn up diagonally through 3 more perforated plates, before it exits the top chamber. 
-A super easy to use high flowing drain valve. 
-Powder coated for enhanced durability. 
   
We offer the ST Stage 1 OCC kit in two different mounting locations.
 
Mounting location 1:
-DM OCC is mounted off the intake manifold sound symposer support hole
Benefits:
-Very easy to drain, as the drain valve can be accessed from atop the engine
-Quick install, mostly from above the engine
-The factory top engine cover does not interfere with the OCC
-Minimal hose lengths, minimal hose routing
Disadvantages:
-Sound symposer delete is needed, however we offer one here
-Only works with the factory intake manifold

Mounting location 2:
-DM OCC is mounted off the frame rail underneath the intake
Benefits:
-The DM OCC is mounted low and out of the way
-Works with aftermarket intake manifolds
-Sound symposer does not need to be removed or deleted
Disadvantages:
-Draining is easiest from below the car with the undertray removed
-Longer install time, mostly from underneath the car
-Longer hoses and more hose routing

Install video For Stage 1 Location 1

  • 5 stars: 88 (92%)
  • 4 stars: 8 (8%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
J
Jeff Schultz
Quality parts

I’ve been running this catch can for a couple weeks and it’s doing exactly what it’s supposed to do. Easy to install.

C
Christopher A Grattan
Stage 1 Diamond Motorsports Front Mount Catch Can

So far I assume it is great! Haven't had to drain it yet, but I'm sure it's doing a job. Installation was a breeze besides trying to move the intake manifold forward, that was kind of difficult at times lol. The folks at Damond Motorsports are extremely knowledgeable and provide great customer service. I give this order and product an A+++!

A
Austin Wright
Necessity

Finally got around to purchasing a catch can for my car, and love the way this looks in the engine bay. Easy installation and perfect fitment. Only down fall is you cannot unscrew the top from the bottom to check the capacity, other than that it’s just a piece of mind knowing your getting some extra longevity out of your engine.

C
Christopher Roth
Quality product

This is the fourth or fifth catch can I have installed and I really like the ease of installation of this product, the quick disconnect on the hoses makes it a breeze. It’s a quality product

E
Eric Russell
After some confusion on my part…….

Called the number, sent pictures of the bracket in question and quickly responded with the detailed instructions that I had a hard time finding. After that install was a piece of cake and can already tell it’s working. After couple hundred miles I could drain it and it’s working flawlessly.

C
Cameron Thomas
Great quality

Overall really good construction, looks good, and works as it should. I like how a drain hose is included to make draining easier. Super simple install and well worth the money

R
Richard LaPoint
Great Quality

This kit is excellent quality as usual. Damond all the way. I have all three motor mounts from them and stage 1 catch can. Very nice quality products.

T
Toby
Very nice kit

Well made and easy to install. Customer service is top I'm a noob to turbo cars, and they answered all my questions quickly and honestly. Will definitely do business with them again.

E
Ethan Moore
BUY ASAP & WITH CONFIDENCE.

After looking at multiple other options Damond has by far the best bang for your buck catch can setup. I purchased a symposer del, RMM, and the 1st location stage 1 catch can and seriously COULD NOT be happier. Install was a piece of cake & it looks amazing with the gold finishes. Great build quality and customer service all around! HIGHLY Recommend!
If you don’t have the catch can, or just recently purchased your Focus do not hesitate to jump on the catch can setup, it will save your engine and look good doing so.

A
Andrew Gooley
Should have done it sooner.

I had to clean my throttle body recently, and in doing so discovered how awful my intake valves looked. I search for some preventative tools, and OCC's came up most often (second to walnut blasting). I chose Damond because of the positive reviews it got just from the build quality alone. The install was a breeze (30ish minutes- mostly spent repositioning the PVC line). I would recommend removing the entire intake manifold (throttle body connected) from the head and charge pipe rather than lifting the car to take off the charge pipe. It was much easier, and I did it without needing to lift the car. It's amazing how much trash the OCC collected. Every DI car needs one of these from the factory.
I'm getting the valves walnut blasted later to clean and maintain them.

N
Nathan Wilson
Great Product

Easy install and very clean looking in the engine bay. I cant atest to how much oil it catches yet. My only complaint is that the can itself doesn't come in different colors, but other than that I'm really happy with the product

N
Noah Hagy
Amazing product.

Super easy install. Paired with a radium baffle plate and already noticed it doing its job within 500 miles.

M
Matthew Mccarter

Fairly easy to install it really helps catch the excess blow by everything I've read about it was good I wished I would have bought it sooner should maybe take 45min at the most I highly recommend this product for anyone wanting better engine life when I took my manifold cover off I could see the ridiculous amount of oil build up so in short it works and you should get it asap.

J
Jonathan Chavarin
Oil catch can stage 1 location 1

Good quality product, have read nothing but good reviews. The instructions provided by Damond are easy to follow. The install itself took maybe only 20-30 mins as it was straight forward and self explanatory.

A
Aaron
Works well

Works really well I am suprised installed sunday and drained friday after about 250-300 miles, install my super easy. Only problem I had was it was missing a bolt that mounts the can to the bracket so I have it temporarily rigged till I can find a bolt

M
M.R.

Straight out of the box, I could tell it was great quality! Very excited to install!

C
Cameron

Never disappointed, great product will be coming back for more!

k
kjell aake garstad
Catch can

Good ,product and good price

S
Shane Smith
Perfect

Excellent build quality, perfect fitment. Damond Motorsports always delivers a great product. Took about an hour to install with installing a oil baffle plate. Love knowing motor is protected with stage 1 and 2 OCC kits. Thank you Damond Motorsports!

G
G.Q.
Catch can

Super easy install, works great, looks great, great people running the company. Would give 10/10.

W
Wes
Nice

Nice works well I'm happy with it

A
Allen Seville
Fast shipping

Fast shipping and very helpful customer service

S
Sammy Franceschi Franceschi
Great quality

Quality catch can and super easy to install. I love that it sits right under the cover so everything goes back to a stock look. So glad I went with these guys.